Installation guide
2-54
Preparation
5 Scan preferences Opens Scan and Print preferences screen.
6 Print preferences • Resolution: Select fineness of images when sending
fax.
Value: 200 × 100 dpi Normal, 200 × 200 dpi Fine,
200 × 400 dpi Super fine
• Density: Adjust density using 7 levels when sending
fax.
Value: Lighter (-3), Lighter (-2), Lighter (-1), Normal,
Darker (+1), Darker (+2), Darker (+3)
• Duplex: Performs duplex printing if a fax of multiple
pages are received when printing a fax.
Value: Off, On
Note Duplex only appears on the FS-1125MFP and
FS-1325MFP.
7 Transmit Terminal ID
(TTI)
Select whether or not to print the local fax information on the fax on the receiving
system.
8 Volume control Opens Volume control screen.
• Speaker: Adjust the volume of the speaker.
Value: 0 - 5
• Monitor: Adjust the volume of the monitor.
Value: 0 - 5
For details on volume, refer to Sound on page 7-25.
9 Dialing mode Select the dialing mode according to the line type.
Note This setting does not appear in some regions.
10 Number of retries The number of automatic retry times can be changed.
Value: 0 - 14
11 RX date and time Reception date/time function adds the reception date/time, sender information and
number of pages on the top of each page when the message is printed out.
12 RX settings Select the reception mode.
Value: Auto (Normal), Auto (DRD)
Note DRD reception mode is only available for Australia and New Zealand. This setting
does not appear in other regions.
13 RX start speed Set the RX start speed.
Value: 33600 bps, 14400 bps, 9600 bps
14 ECM RX Set whether ECM RX is performed.
15 Number of rings The number of rings until the machine answers a call can be changed as needed.
Value: 1 - 15
16
Forwarding Set whether to forward the received faxes.
17 FAX number Register a forwarding destination. Up to 64 characters can be entered.
18 TX start speed Set the TX start speed when forwarding.
Value: 33600 bps, 14400 bps, 9600 bps
19 ECM Set the ECM when forwarding.
20 Forward time setting Register the start time and end time between which forwarding is enabled.
No. Item Description