System information

COMMAND CENTER Pages
10 KYOCERA COMMAND CENTER
Basic > Defaults > Address Book > Contacts
This page allows you to add, edit or delete Contacts.
Adding a New Contact
1. Open the Address Book Contacts page.
2. Click Add Contact. The Address Book Contacts - Add page opens.
3. Enter the information for the address to be registered. You can specify a FAX number
and i-FAX address even if the FAX System is not installed.
4. Click Submit.
Editing a Contact
1. Open the Address Book Contacts page.
Error Clear Timer
Specifies the time between 5 and 495 seconds after which
errors are cleared automatically.
RAM Disk Mode
Specifies whether to use a part of the print system memory
as a RAM disk. You can specify the size of the print system
memory to use for the RAM disk. If this item is On, electronic
sorting is enabled and the printing speed increases. After
you have changed the setting, you must restart the printing
system.
RAM Disk Size
Specifies the size of the RAM disk. For allowable sizes, refer
to the print system operation guide. After you have changed
the setting, you must restart the printing system.
Interrupt Clear
Time
This determines the time of period before the machine
reverts to normal mode, after the interrupt copy mode has
been engaged. The range is 5 to 459 seconds (in 5-second
increments).
WSD Scan Timer
This determines the time of period before the machine
reverts to normal mode, after WSD scan mode has been
engaged. The range is 10 to 495 seconds (in 5-second
increments).
File Name
You can change the file name for the scan data or the job
name for the jobs on the Job page.
Additional
Information
You can add a Job Number or the Data and Time to the File
Name designated above. The additional information varies
depending on model.
Unusable Time
Setting
This restricts use of the machine by time of day. When
turned On, the machine becomes unoperative during the
time of day specified by Unusable Time. Except, the
received FAXes are stored in the machine and printed after
the unusable time period has been expired.
Unusable Time
This determines the time of period during which the machine
is restricted for use. This is enabled when Unusable Time
Setting is On.
Item Description