System information

COMMAND CENTER Pages
16 KYOCERA COMMAND CENTER
Printer Page
This section includes settings that apply to the printing function of the machine, such as
default print resolution or copy count. If the Admin password has been set, pages in this
section are available only to the Administrator.
Default printer settings will be overridden by the printer driver settings. Settings that
affect the machine entirely, such as locking the operation panel, are found under Basic
Page on page 7.
Printer > Summary of Network Printer Access Methods
The following information that has already been set is displayed here.
- IP Address
-Host Name
- Net BEUI Name
- Apple Talk Name
Printer > System
The table below provides a summary of the items displayed on the System page.
Import
Certificate
Click Import to open the File Import window. Click Browse
to open the file selection dialog box. Select a file and click
Open. Enter the password and click Submit. The certificate
is imported.
Delete
Certificate
Click Delete. The certificate is displayed. Click Delete again
to delete the certificate. When the certificate is deleted,
IEEE802.1x is turned Off.
Item Description
Item Description
Form Feed
Timeout
Adjusts the timeout between 5 and 495 seconds, after which
a form feed will occur in the absence of data. The default
setting is 30 seconds.
Emulation
Selects an emulation mode.
Alternate
Emulation
Specifies which emulation mode should be used for
processing at the time data other than KPDL is received,
when AUTO is selected for emulation.
JPEG Print from
USB
This determines the physical size of JPEG images when
printing them from a USB flash device. Choices include Fit
to Paper Size, Image Resolution, and Fit to Print
Resolution.
Duplex Mode
*1
Selects the default duplex mode from Off, Long Edge and
Short Edge.
Copies
Sets the number of copies to print.
Page Orientation
Switches Portrait or Landscape page orientation.