System information

COMMAND CENTER Pages
Operation Guide 17
*1 : Available on machines with the duplex printing.
*2 : Available for some color machines.
*3 : Available for monochrome machines and some color machines.
*4 : Available on machines which support Gloss Mode.
Printer > System > APL. Filter
This page allows you to configure the APL. Filter. The APL. Filter is a function that
converts the received print data to the specified code and prints that data.
Printer > System > APL. Filter Parameters
Configure items that can be set differently between APL. Filters. You can specify fonts
and the text to be converted.
Tone
*2
Sets Tone mode to Normal or Fine. The default setting is
Normal.
Gloss Mode
*2*4
Sets Gloss Mode to High or Low. The default setting is
Low.
Color Mode
*2
Sets Color Mode to Monochrome or Full Color.
KIR Mode
*3
Switches KIR (Kyocera Image Refinement) smoothing On
or Off.
EcoPrint Mode
*3
Switches EcoPrint On or Off to control toner consumption
for saving the printing costs. The default setting is Off.
Resolution
*3
Changes the printing resolution.
Item Description
Item Description
Filter
Switches the APL. Filter On or Off.
Filter Name
Selects the APL. Filter. You can select the ASCII to KPDL
conversion process.
Item Description
Font
Specifies the fonts used for printing.
Start of String
Specifies the character string with which the text to be
converted begins. Up to 15 single-byte characters can be
specified.
End of String
Specifies the character string with which the text to be
converted ends. The default setting is \f. Up to 15 single-byte
characters can be specified.