System information

COMMAND CENTER Pages
20 KYOCERA COMMAND CENTER
Scanner > SMB
The table below provides a summary of the items displayed on the SMB page.
Scanner > E-mail
The table below provides a summary of the items displayed on the E-mail page.
Scanner > i-FAX
This sends scanned data in i-FAX mode. The subject and body contents for i-FAX must
be specified. The contents displayed on this page are the same as in Scanner > E-mail,
described above.
FAX / i-FAX Page
This section includes settings, such as FAX transmission and reception settings, that
apply to the FAX function of the device.
FAX / i-FAX > Common > Defaults
The table below provides a summary of the items displayed on the FAX / i-FAX >
Common page.
Item Description
SMB Protocol
Switches the SMB Protocol On or Off.
SMB Port
Number
Set the SMB default Port Number or use the SMB default
port 445.
Item Description
Subject
You can include the model name of the printer, serial
number, MAC address, host name and IP address in the
subject line as follows: Enter one of the following conversion
strings starting with %. The string will be converted into a
pre-defined string to display the above information.
- %printer = Model
- %serial = Serial Number
- %etheraddr = MAC Address
- %host = Host Name
- %ip = IP Address
Body
You can enter the information that you want to appear in the
body of the E-mail.
Item Description
Local FAX Name
Specifies your FAX system name.