System information

COMMAND CENTER Pages
Operation Guide 35
-TCP/IP
-Netware
-IPP
- AppleTalk
- NetBEUI
-SMTP
-POP3
- SNMP v1/v2
-SNMPv3
-LDAP
- SSL
- IPSec
- IEEE802.1x
Advanced > Protocols > TCP/IP > General
The table below provides a summary of the items displayed on the TCP/IP > General page.
Item Description
Host Name
Specifies a name for the printing system network component.
This name is also used as the NetBEUI printer name.
IPv4 Settings
DHCP/
BOOTP
Specifies whether or not to automatically obtain an IP
address using DHCP or BOOTP.
IP
Address
Assigns an IPv4 address to the printing system network
component. The format of the IPv4 address is a sequence of
numbers (32-bit in total) separated by dots, e.g.
192.168.110.171.
Subnet
Mask
Specifies the subnet mask.
Default
Gateway
Specifies the IP address of the default gateway.
Domain
Name
Specifies the DNS (Domain Name System) name of the
domain to which the printing system belongs. It should not
contain the host printer name, as in kyoceramita.co.jp.
DNS
Server
(Primary,
Secondary)
Specifies the IP addresses of the primary and secondary
DNS (Domain Name System) servers. When DHCP/BOOTP
is turned On, you can select to use either the DNS servers
obtained via DHCP or the DNS servers being set under this
item.
WINS
Server
(Primary,
Secondary)
Specifies the IP addresses of the primary and secondary
WINS (Windows Internet Name Service) servers. When
DHCP/BOOTP is turned On, you can select to use either the
WINS server obtained via DHCP or the WINS server being
set under this item.