System information

COMMAND CENTER Pages
Operation Guide 41
Advanced > E-mail > SMTP > E-mail Recipient #
This page allows you to set the address for receiving E-mail and contents of event
reports. Up to three recipients can be set.
Authentication
Protocol
Enables or disables the SMTP authentication protocol or
sets POP before SMTP as the protocol. The SMTP
authentication supports Microsoft Exchange 2000.
Authenticate as
Specifies the user to be authenticated in SMTP
authentication. When POP3 User 1 to 3 (refer to Advanced >
E-mail > POP3 > User # on page 43) and iFAX User are set,
you can select one of them. If you want to select a different
user, select Other and enter the login account name and
login password for authentication.
Login User
Name
When Other is selected for Authenticate as, the account
name set here will be used for SMTP authentication.
Login
Password
When Other is selected for Authenticate as, the password
set here will be used for authentication.
POP before
SMTP Timeout
Enter the timeout in seconds during which this machine tries
to connect to the SMTP server when set POP before SMTP
as the Authentication Protocol.
Test
Tests to confirm that the settings on this page are correct.
When the Test button is pressed, this machine tries to
connect to the POP3 server.
E-mail Size
Limit
Enter the maximum size of E-mail that can be sent in
Kilobytes. When the value is 0, the limitation for E-mail size
is disabled.
Sender Address
Enter the E-mail address of the person responsible for the
printing system, such as the printer administrator, so that a
reply or non-delivery report will go to a person rather than to
the machine. The sender address must be entered correctly
for SMTP authentication. Note that no mail message can be
sent unless the sender's address is specified.
Signature
Enter the signature. The signature is free form text that will
appear at the end of the E-mail body. It is often used for
further identification of the machine.
Domain
Restriction
Enter the domain names that can be permitted or rejected.
You can also specify the E-mail addresses.
Item Description
Item Description
Recipient #
Address
Enter the E-mail address for this recipient.