System information

COMMAND CENTER Pages
42 KYOCERA COMMAND CENTER
Advanced > E-mail > POP3 > General
To use the E-mail function, you need to connect the printing system to an E-mail server
using the POP3 protocol.
Subject
Specifies the information to be displayed at Subject. When
the following variable starting with "%" is entered, it is
converted to values for information set on this machine and
displayed at Subject.
- %printer = Model
- %serial = Serial Number
- %etheraddr = MAC Address
- %host = Host Name
- %ip = IP Address
Event Report
Items
Select the events you want to be reported. These events are:
- Add Paper
- Low Toner
- Add Toner
- Cover Open
- Paper Jam
- All Other Errors
Event Report
Interval
Enter the E-mail interval. An E-mail will be sent at the end of
the interval only when at least one of the selected error
conditions has occurred during the interval. The interval can
be set from 1 minute to 10000 minutes.
Scheduled
Report Items
Check one or more items from Printer Status, Network
Status, and Counter Status.
Scheduled
Report Interval
Select the time or interval for sending the status information.
• None: No report is sent.
• Monthly: Sends on the specified time of specified month.
• Weekly: Sends on the specified time of every week.
• Daily: Sends at the specified time of every day.
• Hourly: Sends at the specified interval every hour.
If a specified day does not exist in the month, such as the
31st, the last day of the month is used as the specified day.
Run once now
You can test this by clicking the Send button to immediately
send a report.
Item Description
Item Description
POP3 Protocol
Enables or disables POP3 protocol.
Check Interval
Checks E-mails in POP3 server at specific interval. Specify
the interval in the range from 3 minutes to 60 minutes. The
default is 15 minutes.
Run once now
Click the Receive button to immediately receive E-mail from
the POP3 server.
Domain
Restriction
Enter the domain names that can be permitted or rejected.
You can also specify the E-mail addresses.