System information

COMMAND CENTER Pages
48 KYOCERA COMMAND CENTER
Advanced > Security > Secure Protocols
You can encrypt communication between a PC and this machine using SSL encryption.
After you have changed this setting, you must restart this machine. For the restarting
procedure, refer to Basic > Defaults > Reset on page 9.
Auto Sending
Determines whether the job log report is sent or not. Set this
to On to send the report.
Max Job Log
Set the number of job logs for sending, from 1 to 1500.
Run once now
You can test this by clicking the Send button to immediately
send a report.
Item Description
Item Description
SSL
Specifies whether or not to use the SSL protocol.
Serverside
Settings
Effective
Encryption
Selects the encryption algorithm(s) to be used.
HTTP
Security
Specifies the security level.
Secure
Only
(HTTPS)
Encrypts all communication. Access is possible only with a
URL that begins with "https://." Access attempts using an
ordinary http:// URL are automatically redirected to the URL
where "http://" is replaced with "https://."
Not
Secure
(HTTPS &
HTTP)
Enables access for both encrypted and unencrypted
communication. Access is possible with https:// and http://
URLs. The former URL establishes encrypted communication
and the latter establishes normal communication.
IPP Security
Specifies the security level.
Secure
Only (IPP
over SSL)
Encrypts all communications.
Not
Secure
(IPP over
SSL&IPP)
Enables access for both encrypted and unencrypted
communications.
Clientside
Settings
Effective
Encryption
Allow you to specify the encryption algorithm for data
communication. You can use more than one algorithms at a
time.
Certificate
Verification
When set On, verify the expiration of the server certificate at
communication. If found expired, communication will fail.
When set Off, the expiration will not be verified.