System information

COMMAND CENTER Pages
Operation Guide 49
NOTE: When the SSL is set to On and HTTP Security is set to Secure (HTTPS), the
document boxes cannot be accessed the TWAIN driver.
Advanced > Security > IEEE802.1x
The IEEE802.1x security protocol allows the user to login to the secured networks based
on the client certificates.
Advanced > Security > IPSec > General
This page allows you to set access restrictions for IPSec protocol-based communication.
Item Description
IEEE802.1x
Specifies whether or not to use the IEEE802.1x protocol.
Authentication
Type
Selects either EAP-TLS or PEAP (EAP-MS-CHAPv2) for the
authentication type.
Login User
Name
Enter the name of the user who accesses the printing
system. The IEEE802.1x client certificate of this user must
be valid.
Login Password
You can set a PEAP-based password. (This setting is valid
when PEAP (EAP-MS-CHAPv2) authentication type is
selected.)
Common Name
Specifies the common name of the server certificate if the
server is required to be authenticated. (This setting is valid
when PEAP (EAP-MS-CHAPv2) authentication type is
selected.)
Match Rule of
Common Name
When the server certificate is verified, the common name
specified under
Common Name is compared with the
common name on the server certificate. This item allows you
to specify whether the common names are considered to be
matched if they exactly or partially match. (This setting is valid
when PEAP (EAP-MS-CHAPv2) authentication type is
selected.)
Certificate
Status
Displays whether the certificate is valid or not.
Item Description
IPSec
Specifies whether or not to enable the IPSec protocol. Select
On to enable the IPSec protocol. Select Off to disable it.
Restriction
Specifies the default policy for non-IPSec packets.
Select
Allow to allow communication with all hosts and
networks including those not permitted by the rules described
under Advanced > Security > IPSec > Rule1 (to Rule3) on
page 50. Select
Deny to allow communication only with the
hosts and networks permitted by the rules.