Printer User's Manual

Options
3-6 ADVANCED OPERATION GUIDE
General Description of Options
Memory Card
The printer is equipped with a slot for a memory card with the maximum
size of 256MB. A memory card is useful for storing fonts, macros, and
overlays. You can use the IC Link for Windows utility to download fonts,
etc., to a flash memory card. This software is included in the CD-ROM
supplied with the printer.
Reading Font from the Memory Card
Once inserted in the printer’s slot, the contents of the memory card can be
read from the control panel or automatically when you power on or reset
the printer. To manually read data in the memory card, see Using the
Memory Card on page 2-51.
NOTE: Before inserting a memory card in the printer, make sure that the
printer is switched off.
Insert the memory card in the memory card slot with the label side up.
PF-60 Paper Feeder
The PF-60 paper feeder allows you to add 3 (1: FS-C5015N) more paper
cassettes to the bottom of the printer for continuous feeding of a large
volume of paper. Each paper cassette can hold up to approximately 500
sheets of ISO A4, ISO A5, JIS B5, letter, and legal size (80 g/m²) paper.
This feeder is attached at the bottom of the printer as shown below.
Memory Card Slot