Operation Manual

Other Settings
1-50
3
Click Broadcast to display the dialog box shown below.
Broadcast
To send PRESCRIBE commands to the printer, enter the command in the
Broadcast text box. The maximum length for a command sequence is 26
characters. Then click the SEND button to send the command to the
printer.
FRPO
FRPO is a PRESCRIBE command that permanently changes the printer's
internal parameters. Each parameter is represented by two letters, such as
R4 for default paper source, succeeded by FRPO, then followed by a value.
For example, FRPO R4, 1; means that the default paper source (R4) is the
printer's cassette (1).
To confirm the current value for an FRPO parameter:
1
Enter the parameter (for example R4) in
FRPO
.
2
Click on
GET
. The current value is shown in
Value
.
To change the value for an FRPO parameter:
1
Follow the above procedure to display the current value in
Value
.
2
Erase the current value and enter the new value. For example, to
change the default paper source to the MP Tray in the above
example, enter 0 instead of 1 in
Value
.
3
Click
SET
. The value is changed.
FRPO
Broadcast