Operation Manual

KM-NET Remote Operation Panel Utility
1-11
3 SET UP button This allows you to make the following basic settings for the KM-NET
Remote Operation Panel
utility:
• Status polling
• Error notification
• Virtual printer animation
For details on these settings, see section 1.3.1 Basic Settings for
the KM-NET Remote Operation Panel on page 1-12.
4
CONNECT button This allows you to select the type of connection between the printer
and the computer — either local (via serial, parallel interface, or
USB) or network. For details, see section 1.3.2 Connecting the KM-
NET Remote Operation Panel Utility to the Printer on page 1-
15.
5
HELP button Displays help messages.
6
GO button This button appears only when the printer is connected to the
computer via a network. It has the same function as the printer’s
key and does the following:
• Switches the printer online and offline, prints and feeds out one
page, and continues printing when Press GO error messages are
displayed on the
KM-NET Remote Operation Panel.
7
MENU button This is used to change various printer settings from the KM-NET
Remote Operation Panel
utility. See page 1-16.
8 Printer image This virtual printer animation graphically indicates the printer’s
status. For example, when you open the printer’s top cover, the top
cover on the printer image also opens.
It may take several minutes for a change in status to be
reflected in the animation.
Reference Name Function
Table 1-4 (Continued)