Operation Manual

Using the Operator Panel
1-55
5
Press the ENTER key. A question mark (?) appears.
If you want to abandon this procedure, press the CANCEL key.
6
Press the ENTER key. Processing appears and printing of the list
starts.
The printout (example above) includes the following information.
Device Name/Number. CARD/A is indicated for the memory card.
Capacity. The total memory of the card, in bytes.
Used Space. The total size of data stored on the memory card, in bytes.
Free Space. The total remaining memory capacity of the card, including the
amount of memory the printer uses for its system.
Partition Name. The name of the data as assigned by the printer.
Partition Size. The size of the data, in bytes.
Partition Type. The type of the data, i.e. whether it is host data (Data) or font
data (Font).
After the list of data names (PARTITION LIST) for the memory card is
printed, the message display returns to Ready.
>List of
Partitions ?
Partition Information
Device Information
PARTITION LIST
FS-1050 Page Printer