Operation Manual

1.5. Multi-Purpose Tray Feeding
The multi-purpose tray is incorporated in the front of the printer. It can be used in one of
three modes: the cassette mode, manual mode or first mode.
When used in the cassette mode, in combination with the main cassette, provides the printer
with the capacity to accommodate 350 sheets of paper. The manual-feed mode enables print-
ing on special paper, manually fed a single sheet at a time.
Appendix B
lists the paper types
usable. See page
1-20
for explanation on the mode.
The printer assumes all paper fed from the multi-purpose tray is of A4 size (21
x 29.7 cm) if the MP tray setting is at A4 or smaller and the multi-purpose tray
mode is Cassette. (Otherwise, the printer assumes the paper size is of legal
size.) To avoid paper jam, do not put legal size paper in the multi-purpose tray
if the MP Tray setting is at A4 or smaller and the multi-purpose tray mode is
Cassette.
Selecting the Multi-Purpose Tray
1.
Taking hold of the front of the printer as
shown in the figure, open the multi-pur-
pose tray by pulling towards you.
2.
Withdraw the sub tray as shown in the
diagram.
3.
Raise the paper protector bar until it locks
in the up position. Then adjust the paper
guides to the size of the paper being fed.
Multi-Purpose
Tray
Protector Bar
Paper Guides
Sub Tray
1.5. Multi-Purpose Tray Feeding
1-17