Operation Manual

3.13 Other Modes
3-108
5
55
5
To change the timeout time, press the ENTER key. A blinking cursor (
_
) appears.
6
66
6
Press the ! or " key to increase or decrease the value at the blinking cursor and set
the desired time. The timer can be set between
5
and
240
min, in 5-minute increments.
Use the # and $ keys to move the cursor right and left.
7
77
7
When the desired timeout time is displayed, press the ENTER key.
8
88
8
To exit the menu selection, press the MENU key.
3.13.4 Received Data Dump
You can print data received by the printer as hexadecimal code for debugging programs and
files.
1
11
1
Press the MENU key.
2
22
2
Press the ! or " key repeatedly until
Others >
appears.
3
33
3
Press the # key.
4
44
4
Press the ! or " key repeatedly until
> Print HEX-DUMP
appears.
5
55
5
Press the ENTER key. A question mark (
?
) appears.
>Sleep Timer >
030
min.
Others >
>Print HEX-DUMP
>Print HEX-DUMP?