Operation Manual

3.13 Other Modes
3-114
5
55
5
Press the # key and display
>> Auto Continue Timer.
6
66
6
Press the ENTER key. A blinking cursor (
_
) appears.
7
77
7
Press the ! or " key to increase or decrease the value at the blinking cursor and set
the desired time. The time must be set between 000 and 495 seconds, in 5-second
increments. If set to
000
, printing will be continued immediately without any time
interval. You can use the # and $ keys to move the cursor right and left.
If you wish to abort the setting procedure, press the CANCEL key.
8
88
8
Display the desired time and press the ENTER key.
9
99
9
Press the MENU key. The display returns to
Ready
.
>>Auto Continue
Timer 000sec.
>>Auto Continue
Timer 000
sec.