Operation Manual

3.6 Making Default Settings
3-49
7
77
7
To change the pen width and/or pen color, press the ENTER key. A blinking question
mark (
?
) appears.
8
88
8
Press the ! or " key repeatedly until the desired pen number of
1
to
8
appears.
9
99
9
When the desired pen number is displayed, press the ENTER key.
10
1010
10
To change the pen width, press the # key, then press the ENTER key. A blinking
cursor appears at the width value.
Press the ! or " key repeatedly until the desired pen width in dots (
00
to
99
) appears.
When the desired pen width is displayed, press the ENTER key.
11
1111
11
To set the pen color, press the ! or " key. To change the pen color, press the ENTER
key. A blinking question mark (
?
) appears.
Press the ! or " key repeatedly until the desired pen color (
Black
,
Red
,
Green
,
Yellow
,
Blue
,
Magenta
,
Cyan
,
White
) appears. When the desired pen color is
displayed, press the ENTER key.
12
1212
12
To set the KC-GL page size, press the $ key twice, then Press the ! or " key until
>
KC-GL Page Set
is displayed.
13
1313
13
To change the page size, press the ENTER key. A blinking question mark (
?
) appears.
Press the ! or " key repeatedly until the desired page size (
A2
,
A1
,
A0
,
B3
,
B2
,
B1
,
B0
, and
SPSZ
) appears. The SPSZ command sets the paper edge limits to the
dimensions of a standard paper size. See this command
explained in the Programming
Manual in the CD-ROM.
Press the ENTER key to set the page set you just selected.
14
1414
14
Press the MENU key. The display returns to
Ready
.
>KC-GL Pen >
Adjust ? Pen (1)
>>Pen(1) Width
02
dot(s)
>>Pen(1) Color
? Black
>KC-GL Page Set
? [A2]