User's Manual

iBurst Terminal, Desktop Model (UTD) / USB Model (UTU), Manual

Kyocera Corporation Revision 1.01 --- June.08.2006

- 57 -

52. Select [NDIS(PPPoE) Usermode I/O Protocol for iBurst Terminal], click the [OK] button.

NOTE: If the same dialog at step 47 is popped up again, cancel once and repeat from step

45.

53. Click the [OK] button.

NOTE: For USB connection with iBurst Terminal, “NDIS(PPPoE) User mode I/O Protocol

for iBurst Terminal -> iBurst Terminal” must be added in this stage.

For Ethernet connection with iBurst Terminal, “NDIS(PPPoE) User mode I/O

Protocol for iBurst Terminal -> The name of the Ethernet Network Interface Card

or Port” shall be added in this stage.