Operating Instructions Name & Function of Parts a b c d e f g h i j k l m n o p q r s t u v w x y z A B C D E Earpiece Main Display OK key Address book key Mail key Clear /Memo key Answer/Pair key Number keys Quick key Microphoｎe Built-in antenna(Sub antenna) Optical sensor Built-in antenna(Main antenna) Cursor key Application key EZ key -1- Power/End key TV key Built-in antenna(for Bluetooth) Sub Display Illumination Camera lens Infrared port Flash/Camera start indicator Battery pack/cover FeliCa mark
■ Power saving during standby In order to minimize the power consumption, the K007 display turns automatically to power saving mode when key operation is stopped for a while. The indication restores with key operation. ■ key In this manual, the point at which to press the Example) Press or key is indicated as shown below. → Getting Ready to Make a Call 1.
Making an International Call 1. Enter the phone number you want to call using the following pattern on the standby screen. International dial code - Country code - Area code - Subscriber's number 2. Press to make a call. to call United States, number 212-123-XXXX in the USA.
[Assignment of characters and key functions] Characters are assigned to each key as shown below. Press a key repeatedly to cycle through characters assigned to that key. Entry mode key Kanji・Hiragana 漢字 Katakana カナ・ｶﾀｶﾅ Alphanumeric ＡＢ・ABCD Alphanumeric ａｂ・abcd Number １２・1234 あいうえおぁぃぅぇぉ アイウエオァィゥェォ .@-_/: ～ 1 .
Registering in the Address Book You can register frequently used phone numbers and E-mail addresses. Up to 1000 addresses can be registered in the address book. ■ Registering in the address book 1. Press and hold for more than one second on the standby screen. The screen to register a contact is displayed. 2. Enter the item you want. Select the icon of the item you want by and press (Select) to enter it. As for the items you can enter, see "Items to register in the address book". 3. Press (Reg) .
Calling from the Address Book Saved phone number in the Address Book can be loaded and a call is placed to that number. on the standby screen. 1. Press 2. Use to scroll through and display the name you want. 3. Press . Creating and Sending E-Mail 1. Press on the standby screen. . to select “Create New”and press 2. Use Icons : ”Address”to which you send E-Mail : ”Text”which is the mail contents. : ”Subject”of E-Mail : ”Attachment”of E-Mail 3. Use 4. Press 5.
Using the EZweb Service 1. Press on the standby screen. 2. Select " Top Menu/Search" and press (Select). To access information sites (sites that provide information): (Select). Select the desired information site,and press ■ Pressing returns the display to the previous display.Holding down to au one Top. Pressing for a longer time returns you exits EZweb. you can scroll the display up and down by pressing . List of Basic Setup ■ M0 Profile Mode No. Function M0 Profile ■ M1 Time / Toll / Sub Mode No.
M254 M255 M256 M257 M258 M26 M261 M262 M263 M264 M265 M266 M267 M268 M269 M260 M26＊* M26# Close Lamp Event Lamp Birthday Lamp RechargeStartLamp RechargeComp.Lamp Key Illum. Setup Incm Call Illum. Outg Call Illum. Mail Sending Illum. Wake-Up Illum. Power OFF Illum. Open Illum. Event Illum. Birthday Illum. Information Illum. Talk Start Illum. EZweb Start Illum. Infrared Illum. Bluetooth Illum. Camera Shoot Illum.
M431 M432 M433 M434 M435 M436 M437 M44 M45 M451 M452 M453 M454 M455 M46 M47 M471 M472 M48 M481 M482 M483 M49 M40 Specified No. ID Unset Payphone Not Support Unreg Adres Bk Reject All Save Incm History Change Lock No. Reset Learning Reset Function Reset Memory Reset EZapps Reset All Reset Caller ID PIN Code Setup Change PIN Code Need/No Setup Cert. Setup Cert. Disp Confirm Disp Root CA Emer. Position Incoming Display ■ M5 User Support Mode No.
■ Guide Function (M#) Mode No.
design of this phone complies with the FCC guidelines and these international standards. Body-worn Operation This device was tested for typical body-worn operations with the back of the phone kept 0.59 inches (1.5 cm) from the body. To comply with FCC RF exposure requirements, a minimum separation distance of 0.59 inches (1.5 cm) must be maintained between the user’s body and the back of the phone, including the antenna.
