Operation Manual

4-7
4. Printer Driver for WindowsNT
4-8 Device Settings Tab
In order to access the device settings, select “Properties” in step 4 on page 4-1 and then click on the “Device Settings” Tab.
<Universal Driver>
■ Installed Memory (Kilobyte)
Perform this setting according to the amount of memory in your printer. If a mistake is made in this setting, there is a possibility that printing
will not be accomplished properly.
<KPDL2 Driver>
■ Optional Feeder
Perform this setting according to the installed Option Cassette.
■ Optional Disk
Perform this setting when you want to create a RAM disk. Refer to “Chapter 1, 2-2 RAM Disk” on page 2-1 for more detailed information
on creating a RAM disk.
* In order to create a RAM disk, it is necessary to increase the memory capacity of your printer. After increasing memory, perform the
setting here according to the “Memory” setting below.
■ Memory
Perform this setting according to the amount of memory in your printer. If a mistake is made in this setting, there is a possibility that printing
will not be accomplished properly.