Operation Manual

5-8
5. Printer Driver for Windows2000
In order to view this window and make settings for optional equipment, select “Properties” in step 4 on page 5-1 and then click on the “Device
Settings” Tab.
Perform the settings here whenever you add optional equipment. The functions of the optional equipment will only be available to the printer
after you have completed the setting here. The optional equipment available for selection are as follows.
■ Optional Feeder
Perform this setting according to the installed Option Cassette.
■ Optional Disk (only available with KPDL2 Driver)
Perform this setting when you want to create a RAM disk. Refer to “Chapter 1, 2-2 RAM Disk” on page 2-1 for more detailed information
on creating a RAM disk.
* In order to create a RAM disk, it is necessary to increase the memory capacity of your printer. After increasing memory, perform the
setting here according to the “Memory” setting below.
■ Memory
Perform this setting according to the amount of memory in your printer. If a mistake is made in this setting, there is a possibility that printing
will not be accomplished properly.
5-5 Device Settings Tab