User Guide

Job Accounting
4-5
7
Select Name to display and press
[Change #].
8
Enter the department name and press
[End].
For instructions on entering characters,
refer to Entering Characters on Touch
Panel on page 3-55.
9
When all entries are complete, press
[Next].
IMPORTANT: An error will occur if you
do not complete Account ID and Name
to display. You will not be able to
proceed to the next screen. Be sure
that you have completed the entries.
An error will occur if you attempt to
enter an existing department ID code.
You will not be able to proceed to the
next screen. Use a different ID code or
name.
10
Specify restrictions on copying as
desired.
For instructions on restricting copier
usage, refer to Restricting Using the
Copier on page 4-6.
11
Press [Registr.] to finalize settings.
To make settings on another department, press [Register] and repeat steps 4 to 13.
12
Press [Close]. The touch panel will return to the Job Accounting screen.
Sys tem M enu
New register
Setting Item
Account ID
Name to display
Change #
Value
(No register)
Job Management Edit--
33333333
Name to display
Capi tal
Stop
Letter Num./Sym. ConvertSpace
Limit:32 letters including #
All Del .
Cancel
Job
Val ueng Item
a
y 3st sales div ision
Management Edit
Change #
Next
--
Account I D
New register
System Menu Job
Val ueSetting Item
Copy
Output l imi tati on
3st sales division
Management Edit
Cha nge #
No limit
Permitted
Scanner transmi ssion No li mit
Pr inter Permitted
33333333
--