User Guide

Copying Functions

1-35

Booklets from Facing Pages

Delivers booklets, such as a magazine, by adding front and back covers (with or without copying).

The paper source to supply the paper for the cover is specified using the system menu. Refer to

Specifying Cassette for Cover Paper on page 3-9.

NOTE: The supported original sizes and paper sizes are as follows.

If your copier is equipped with the optional document finisher, you can staple the booklet in the

center margin. If the copier is also equipped with a folding unit, you can combine a center margin

with folding at the center. The following paper sizes are supported when stapling the center margin

or combining a center margin with center folding.

Copying on covers

The original for the cover is scanned first. When the finished copies are folded, that page will be

copied onto the front and back covers.

Blank covers

When the finished copies are folded, both the front and back covers will be blank.

Follow the steps as below for this kind of booklet.

Place the originals and press [Function].

Original Size Paper Size

Inch models 11 × 17" and 8 1/2 ×11" 11×17", 81/2 × 14", 11 × 8 1/2" and

8 1/2 ×11"

Metric models A3, B4, A4R, B5R, A5R and 8K A3, B4, A4, A4R, B5 and B5R

Supported Paper Sizes

Inch models 11 × 17", 8

1/2 × 14" and 8 1/2 ×11"

Metric models A3, B4 and A4R

Originals Copies