User Guide

Copying Functions

1-62

Programming Multi-Part Jobs

With a job build, scans individual sets of originals in separate steps for a single copy job. In each

step of the scanning process you can specify different settings (such as zooming and border erase)

and you can specify different types of originals. Other examples include inserting a blank sheet

between sets of copies from each step and specifying a front cover page during a duplexing step.

Job Build Procedure

This procedure describes how to use a job build for the following example.

Example

In the figure, pages with asterisks indicate blank

sheets.

NOTE: For the preparation of this job, colored paper for the cover is loaded in the MP tray and

standard paper is loaded in the cassette 1.

Step 1: Display the Job Build screen

Press the Job Build key.

Complete the Settings Common to All Steps

Specify Duplexing and Repeat Copy.

NOTE: Repeat Copy is used to enable additional copies later.

A variety of other settings and functions are available besides those shown in this example. Refer to

Specifying Copy Functions on page 1-67 for details.