User Guide

Copying Functions
1-69
2
For finishing, press [On] ([1 set] or
[Output each page]) or [Off]. Refer to
Offset Mode on page 1-10 for details.
For stapling, press [Staple Mode] and
complete the settings. Refer to Stapling
on page 1-11 for details.
For hole punching, press [Punch Mode]
and complete the settings. Refer to
Punching on page 1-13 for details.
For center margin stapling, press
[Saddle Stitch] ([Center Staple]) and
complete the settings.
For center margin stapling, press
[Saddle stitch].
For center margin stapling with center
folding, press [Bind & Fold].
3
Follow the instructions at the right of the touch panel and confirm the orientation of the placed
originals.
NOTE: Failure to place originals correctly may result in copying errors.
4
Press [Close].
Place originals then press Start key.
BackFinished
Ready to Job build.
Off
Top Edge
Selec t Original Im
a
Direction.
On
Staple Punc h
Mode
Saddle
Stitc h
Offs et Staple Punch
None
Mode
Place originals then press Start key.
BackStaple Mode
Ready to Job build.
Top Edge
Select Original I
Direction.
Limi ted number of staple pages.
None
1 staple
2 staples
The limit is set in setting mode.
When selecting staple function
the offset can not be combined.
Staple
!
Place originals then press Start key.
Back
Select Original I
m
None
Direction.
Top Edge
Punch Mode
Ready to Job build.
2 holes
Punch Preview
3 holes
Place originals then press Start key.
BackSaddle Stitch
Ready to Job build.
Off
Saddle
Bind &
Fold
stitch