User Guide

Copying Functions
1-70
Reducing/Enlarging
Select the desired magnification as follows.
1
On the [Basic] screen, press
[Reduce/Enlarge].
2
Select the desired magnification.
For instructions on reducing/enlarging,
refer to Reducing/Enlarging in Chapter 3
of the Operation Guide for details.
3
Press [Close].
Original Orientation
Specify the original orientation as follows.
1
On the [Basic] screen, press [Orig. Set
Direction].
2
Based on the original orientation, press
[Top Edge] ([Back Edge]) or [Left Top
Edge] ([Left top corner]).
NOTE: Failure to place originals
correctly may result in copying errors.
3
Press [Close].
Ready to Job build.
Job Build
11x8½"
Select
1 sided
Basic
Quality
Reduce
Rear
Orig. Set
Finished
2 sided Copy
Edit
1 sided copy-Left
Finished page #:
Step
Auto %
Original
Place originals then press Start key.
Direction
1 sided/
2 sidedPaper Type
/Enlarge
Ready to Job build.
Back
Reduce/Enl arge
XY Zoom
Auto %
Place originals then press Start key.
# keys
100%
400%
200%
8½x11" 11x17"
129%
8½x14" 11x17"
121%
8½x14" 8½x11"
78%
11
x
64
%
50
%
25
%
5½x8½" 8½x14" 11
x
77
%
5½x8½" 11x17"
154%
11
x
Standard
Zoom
Ready to Job build.
Job Build
11x8½"
Select
1 sided
Basic
Quality
Reduce
Rear
Orig. Set
Finished
2 sided Copy
Edit
1 sided copy-Left
Finished page #:
Step
Auto %
Original
Place originals then press Start key.
Direction
1 sided/
2 sidedPaper Type
/Enlarge
n
als then pr ess Start key.
Set
Back
Left Top
Select Original Image
Direction.
Top Edge
Close
t
ion
to Job build.
"Select Original Image Direction." can
be shown at right side of display.
Fol low the steps. If setting mode is
wrong, incorrect copy will result.
Edge