User Guide

Copying Functions
1-73
Original Size
Specify the original size as follows.
1
Press [Edit]. On the next screen, press
[Select Orig.Size] ([Select Size Orig.]).
2
Select the original size. Refer to Original
Size on page 1-3 for details.
3
Press [Close].
Repeat Copy
Specify Repeat Copy as follows. Use Repeat Copy to enable the production of additional copies as
needed after a copy job is completed.
1
Press [Edit]. On the next screen, press
[Repeat Copy].
NOTE: The Repeat Copy setting
applies to all other steps. Simply
complete this setting once as an initial
step.
2
Press [On] to activate Repeat Copy.
Refer to Repeat Copy on page 1-42 for
details.
3
Press [Close].
Ready to Job build.
Job Build
Off
Border
Auto
Basic
Quality
Page #
Tray A
Off
Edit
1 sided copy-Left
Finished page #:
Step
None
Place originals then press Start key.
Select
Orig.Size
None
Margi n/
Center ing
Select of
Repeat
Erase Copy
Output
Ready to Job build.
Select
11x8½"
8½x5½"
5½x8½"11x17"
Other
Input size
Auto
8½x14"
8½x11"
11x15"
8½x13½"
8½x13"
A4
BackSelect Original Size
Place originals then press Start key.
A4
Cust
o
stand.Si ze
2x2 "
2x2 "
2x2 "
2x2 "
size
Ready to Job build.
Job Build
Off
Border
Auto
Basic
Quality
Page #
Tray A
Off
Edit
1 sided copy-Left
Finished page #:
Step
None
Place originals then press Start key.
Select
Orig.Size
None
Margi n/
Center ing
Select of
Repeat
Erase Copy
Output
Place originals then press Start key.
BackRepeat Copy
Ready to Job build.
Repeat copy allows sets to be sav
e
to the HDD.
Using Repeat Copy function,
jobs can be recalled and output.
Individual passwords can be set.
Off
On