Operation Manual

CHAPTER 2 NAMES OF PARTS
(2) Operation panel
1 Start key (indicator)
(Press to start copying. Copying is possible when the indicator is lit
green.)
2 Stop/Reset key
(Stop: Interrupts or aborts copying and printing.
Reset: Cancels settings and returns the copier in the initial mode.)
3 Size Select key
(Press when copying using the standard zoom mode. See page
4-3.)
4 Number of Copies/Zoom (+) key
(Press to increase the number of copies or magnification ratio.)
5 Number of Copies/Zoom (-) key
(Press to decrease the number of copies or magnification ratio.)
6 Zoom Input/Enter key
(Press when copying using the zoom copy mode. See page 4-3.)
7 Copy quantity/magnification display
(Displays the number of copies to be made and magnification ratio
for reduction/enlargement copying. When displaying a
magnification ratio, % will light.)
8 Add Toner indicator
(Lights when the level of toner becomes low. See page 3-6.)
9 Paper Select key
(Press to select a drawer or the multi-bypass. The indicator for the
selected paper source will light.)
0 Drawer indicator
(Lights when the drawer is selected; flashes when a paper misfeed
occurs or paper is used up.)
! Multi-bypass indicator
(Lights when the multi-bypass is selected (see page 3-3); flashes
when a paper misfeed occurs or paper is used up.)
@ Misfeed indicator
(Lights when a misfeed occurs.)
# Image mode selection key
(Press to select the type of the original.)
$ Copy exposure adjustment keys
(Press the left key to make the copy density lighter; press the right
key to make it darker.)
● Initial mode (at the end of warm-up or when the Reset key is
pressed)
In the initial mode, the drawer is selected as the paper source, the
number of copies is set to “1” and the image mode is set to “Text &
Photo”.
* The image mode selected in the initial mode can be changed
(see “Image mode” on page 5-1).
● Auto clear function
About 90 seconds after copying stops, the copier will automatically
return to the same settings as those after warm-up. (However, the
exposure mode will not change.) Copying can be performed at the
same settings (copy mode, number of copies and exposure) if
copying is started before the auto clear function clears settings.
2-4