Operation Manual
Table Of Contents
- Energy Star Program
- Please read this Operation Guide before using the copier. Keep it close to the copier for easy re...
- Section 1 IMPORTANT! PLEASE READ FIRST.
- Section 2 NAMES OF PARTS
- Section 3 PREPARATIONS
- Section 4 BASIC OPERATION
- Section 5 COPY FUNCTIONS
- Making 2-Sided copies from various types of originals
- Copying two-page originals onto separate sheets: Page Separation/Split Copy Modes
- Making a margin space on the copies
- Making copies with clean edges
- Fitting the image of either two or four originals onto a single copy page
- Automatic Sorting of copy sets
- Saving on toner use
- Memorizing frequently used settings: Program Function
- Section 6 COPIER MANAGEMENT
- Copy Management Mode
- Department Management Modes
- Department Management Code Operations Procedures
- Department Code Registration
- Deleting Department Codes
- Clearing the Department Management Count
- Outputting the Department Management List
- How to set the Department Management Mode
- Making copies when the copier is in the Department Management Mode
- Default Setting Mode
- Checking the Total Counter and Printing Out the Counter Report
- Copy Management Mode
- Section 7 OPTIONAL EQUIPMENT
- Section 8 TROUBLESHOOTING
- Section 9 MAINTENANCE AND OPERATION INFORMATION
- Appendix: Functions and Settings Combination Chart
Section 3 PREPARATIONS
3-7
6 Press either the Zoom (+) or Zoom (–) key and input the
Length Size (Y Direction). 3.88 - 11.63(")/98 - 297 (mm): The
range in which setting is possible.
Inch specifications Metric specifications
7 Press the [Enter] key. The Width can be input after 2
blinks.
Inch specifications Metric specifications
8 Press either the Zoom (+) or Zoom (–) key and input the
Width Size (X Direction). 5.88 - 17.00(")/148 - 432 (mm):
The range in which setting is possible.
Inch specifications Metric specifications
9 Press the [Enter] key. The display will blink and the copier
will return to the Default Settings Mode.
Inch specifications Metric specifications
10 Press either the Zoom (+) or Zoom (–) key to display “F00”.
Inch specifications Metric specifications
11 Press the [Enter] key. Copying can be begun.
Inch specifications Metric specifications
Selecting Special Paper Types
Select the Paper Type when copying on special types of paper such
as thick paper and thin paper. When the Paper Type has been
selected, the copier will change the fixing temperature to match the
paper.
1 Press the Paper Type Selection key and select the type of
paper. The indicator for the type of paper selected will light
up.
2 Proceed with the copying operation.
Notes
• When Paper Type has been selected, the copying speed
is reduced.
• When “Postcard” has been set for either Custom 1 or 2
during the Custom Size input, selecting Custom 1 or 2
(Postcard) using the [Paper Select] key will cause the
Thick Paper display to light up. (Refer to P.3-6
"Inputting Custom Sizes".)