Operation Manual
Table Of Contents
- Energy Star Program
- Please read this Operation Guide before using the copier. Keep it close to the copier for easy re...
- Section 1 IMPORTANT! PLEASE READ FIRST.
- Section 2 NAMES OF PARTS
- Section 3 PREPARATIONS
- Section 4 BASIC OPERATION
- Section 5 COPY FUNCTIONS
- Making 2-Sided copies from various types of originals
- Copying two-page originals onto separate sheets: Page Separation/Split Copy Modes
- Making a margin space on the copies
- Making copies with clean edges
- Fitting the image of either two or four originals onto a single copy page
- Automatic Sorting of copy sets
- Saving on toner use
- Memorizing frequently used settings: Program Function
- Section 6 COPIER MANAGEMENT
- Copy Management Mode
- Department Management Modes
- Department Management Code Operations Procedures
- Department Code Registration
- Deleting Department Codes
- Clearing the Department Management Count
- Outputting the Department Management List
- How to set the Department Management Mode
- Making copies when the copier is in the Department Management Mode
- Default Setting Mode
- Checking the Total Counter and Printing Out the Counter Report
- Copy Management Mode
- Section 7 OPTIONAL EQUIPMENT
- Section 8 TROUBLESHOOTING
- Section 9 MAINTENANCE AND OPERATION INFORMATION
- Appendix: Functions and Settings Combination Chart
Section 4 BASIC OPERATION
4-6
Interrupt Copying is useful when you want to make a copy of a
different original at different settings during copying operations.
After the Interrupt Copy has been produced, the copying operation
resumes at the same settings in effect prior to the interruption.
1 Press the [Interrupt] key. The Interrupt indicator will
blink. It will stay lit when the Interrupt operation becomes
possible.
2 Temporarily storing the original during copy operations.
3 Set the original for the Interrupt operation and copy it.
4 After the Interrupt copy has been produced, pressing the
[Interrupt] key will cause the display to light up. Replace it
with the original that had been put aside and press the
[Start] key to resume copying. Press the [Start] key to
resume copying.
Interrupt Copying