Operation Manual

Section 5 COPY FUNCTIONS
5-4
Page separation/Split copy from book
originals
Copy books, magazines, etc. with two facing pages of an open-faced
original onto separate sheets of paper.
Notes
[Inch specifications]
• The original sizes that can be used are 11" × 17" and
8
1/2" × 11". The paper sizes that can be used are 11" ×
8
1/2". A3, B4, A4R, B5R and A5R Original sizes and A4
and B5 paper sizes can also be used when Custom Size
is set.
• The paper size can be changed and the magnification
adjusted to fit the size of the paper.
[Metric specifications]
• The original sizes that can be used are A3, B4, A4R,
B5R and A5R. The paper sizes that can be used are A4
and B5. 11" × 17" and 8
1/2" × 11" Original sizes and
11" × 8
1/2" paper sizes can also be used when Custom
Size is set.
• The paper size can be changed and the magnification
adjusted to fit the size of the paper.
Page separation/Split copy from 2-sided
originals
The original is copied separately as simplex pages.
Note
The Document Processor (option) is necessary.
1 Set the original.
Note
Set the original in the optional Document Processor
when making copies from Front and Back originals.
2 Press the Split Copy key, select the type of original, and
select [2-Sided → 2-Sided] or [Book → 1-Sided] to light up
the corresponding display.
Note
When the optional Document Processor is used and
[2-Sided → 1-Sided] is selected [E71] will be displayed in
the No. of Copies display.
3 Press the [Start] key.
The copier will begin copying.
In the case where Sort Copies has been set, proceed to
Step 4.
Copying two-page originals onto separate sheets:
Page Separation/Split Copy Modes
2
1
21
1
2
12
Original Copy
2
1
1
2
Original Copy