Operation Manual
Table Of Contents
- Energy Star Program
- Please read this Operation Guide before using the copier. Keep it close to the copier for easy re...
- Section 1 IMPORTANT! PLEASE READ FIRST.
- Section 2 NAMES OF PARTS
- Section 3 PREPARATIONS
- Section 4 BASIC OPERATION
- Section 5 COPY FUNCTIONS
- Making 2-Sided copies from various types of originals
- Copying two-page originals onto separate sheets: Page Separation/Split Copy Modes
- Making a margin space on the copies
- Making copies with clean edges
- Fitting the image of either two or four originals onto a single copy page
- Automatic Sorting of copy sets
- Saving on toner use
- Memorizing frequently used settings: Program Function
- Section 6 COPIER MANAGEMENT
- Copy Management Mode
- Department Management Modes
- Department Management Code Operations Procedures
- Department Code Registration
- Deleting Department Codes
- Clearing the Department Management Count
- Outputting the Department Management List
- How to set the Department Management Mode
- Making copies when the copier is in the Department Management Mode
- Default Setting Mode
- Checking the Total Counter and Printing Out the Counter Report
- Copy Management Mode
- Section 7 OPTIONAL EQUIPMENT
- Section 8 TROUBLESHOOTING
- Section 9 MAINTENANCE AND OPERATION INFORMATION
- Appendix: Functions and Settings Combination Chart
![](/manual/kyocera/km2020/operation-manual-english/images/img-98.png)
Section 8 TROUBLESHOOTING
8-6
3 If an original is jammed inside, remove it carefully so as not
to tear it.
Note
If the original is torn, be sure to remove all remnants or
fragments of it from the drawer. Failure to completely
remove remnants of torn pages can lead to paper
misfeeds.
4 Lift up the Paper Supply Unit (1).
5 If an original is jammed inside, remove it carefully so as not
to tear it.
Note
If the original is torn, be sure to remove all remnants or
fragments of it from the drawer.
6 Rotate the dial as shown in the illustration and remove the
original.
7 Close the Left Cover to return it to its original position.
Add the original that was jammed to the originals on the
Original Table and resume copying.
Paper misfeed in the optional drawer (J12, J13,
J14, J15, J16, J22, J23, J24)
When the paper misfeed location is lit as shown in the illustration
below, the paper misfeed has occurred in the optional drawer. Use
the procedure below to clear it.
Inch specifications Metric specifications
1 Remove the left cover of the drawer being used.
2 If a sheet of paper is jammed inside, remove it carefully so
as not to tear it.
Note
If the paper is torn, be sure to remove all remnants or
fragments from the drawer.
3 Close the left cover of the drawer.
(1)