Operation Manual
Table Of Contents
- Energy Star Program
- Please read this Operation Guide before using the copier. Keep it close to the copier for easy re...
- Section 1 IMPORTANT! PLEASE READ FIRST.
- Section 2 NAMES OF PARTS
- Section 3 PREPARATIONS
- Section 4 BASIC OPERATION
- Section 5 COPY FUNCTIONS
- Making 2-Sided copies from various types of originals
- Copying two-page originals onto separate sheets: Page Separation/Split Copy Modes
- Making a margin space on the copies
- Making copies with clean edges
- Fitting the image of either two or four originals onto a single copy page
- Automatic Sorting of copy sets
- Saving on toner use
- Memorizing frequently used settings: Program Function
- Section 6 COPIER MANAGEMENT
- Copy Management Mode
- Department Management Modes
- Department Management Code Operations Procedures
- Department Code Registration
- Deleting Department Codes
- Clearing the Department Management Count
- Outputting the Department Management List
- How to set the Department Management Mode
- Making copies when the copier is in the Department Management Mode
- Default Setting Mode
- Checking the Total Counter and Printing Out the Counter Report
- Copy Management Mode
- Section 7 OPTIONAL EQUIPMENT
- Section 8 TROUBLESHOOTING
- Section 9 MAINTENANCE AND OPERATION INFORMATION
- Appendix: Functions and Settings Combination Chart
![](/manual/kyocera/km2020/operation-manual-english/images/img-103.png)
9-1
Section 9 MAINTENANCE AND OPERATION
INFORMATION
Cleaning the Original Cover
Open the Original Cover and use a cloth dampened with alcohol or
a dilute neutral detergent to clean the underside of the Original
Cover.
IMPORTANT!
Do not use thinner, organic solvents etc.
Cleaning the Platen
Open the Original Cover and use a cloth dampened with alcohol or
a dilute neutral detergent to clean the Platen.
IMPORTANT!
Do not use thinner, organic solvents etc.
Cleaning the Slit Glass
When black streaks appear on copies when using the optional
Document Processor, this means that the Slit Glass (a) is dirty.
Use a soft dry cloth to clean the slit glass.
IMPORTANT!
Do not use water, thinner, organic solvents, alcohol, etc.
* Refer to P.9-4 "Replacing the Toner Container and Waste
Toner Box" for instructions for cleaning the inside of the copier.
Cleaning the Copier
CAUTION
Remove the power plug from the outlet during
cleaning operations as a safety precaution.
(a)