Operation Manual
Table Of Contents
- Energy Star Program
- Please read this Operation Guide before using the copier. Keep it close to the copier for easy re...
- Section 1 IMPORTANT! PLEASE READ FIRST.
- Section 2 NAMES OF PARTS
- Section 3 PREPARATIONS
- Section 4 BASIC OPERATION
- Section 5 COPY FUNCTIONS
- Making 2-Sided copies from various types of originals
- Copying two-page originals onto separate sheets: Page Separation/Split Copy Modes
- Making a margin space on the copies
- Making copies with clean edges
- Fitting the image of either two or four originals onto a single copy page
- Automatic Sorting of copy sets
- Saving on toner use
- Memorizing frequently used settings: Program Function
- Section 6 COPIER MANAGEMENT
- Copy Management Mode
- Department Management Modes
- Department Management Code Operations Procedures
- Department Code Registration
- Deleting Department Codes
- Clearing the Department Management Count
- Outputting the Department Management List
- How to set the Department Management Mode
- Making copies when the copier is in the Department Management Mode
- Default Setting Mode
- Checking the Total Counter and Printing Out the Counter Report
- Copy Management Mode
- Section 7 OPTIONAL EQUIPMENT
- Section 8 TROUBLESHOOTING
- Section 9 MAINTENANCE AND OPERATION INFORMATION
- Appendix: Functions and Settings Combination Chart
![](/manual/kyocera/km2020/operation-manual-english/images/img-106.png)
Section 9 MAINTENANCE AND OPERATION INFORMATION
9-4
When the Add Toner Indicator on the Operation Panel lights up
and the copier stops, replace the Toner. Replace the Waste Toner
Box at the same time you replace the Toner Container.
* Replenish the Toner only when the Add Toner Indicator lights up
or blinks.
* Whenever the Toner Container is changed, always carry out the
procedures listed from Step 7 on P.9-5 through Step 11 on P.9-6.
If any section is left dirty, the performance of the product cannot
be maintained.
Inch specifications Metric specifications
1 Open the front cover.
2 Push the Waste Toner Box holder to the left and remove the
Waste Toner Box while pushing the holder.
IMPORTANT!
Do not invert the old Waste Toner Box.
3 Use the cap attached to the center of the old Waste Toner
Box to cover the opening.
4 Set the new Toner Container in place, and turn Toner
Container Release Lever (1) to the right.
Replacing the Toner Container and Waste Toner Box
CAUTION
Do not attempt to incinerate the toner cartridge or
waste toner box. Doing so will generate sparks and
may lead to burns.
CAUTION
Do not try to force open or crush the toner
container or waste toner box.
WARNING
The electrically charged section inside the main
unit of the copier uses high voltage. Exercise
caution in handling it to prevent electric shock.
(1)