Operation Manual
Table Of Contents
- Energy Star Program
- Please read this Operation Guide before using the copier. Keep it close to the copier for easy re...
- Section 1 IMPORTANT! PLEASE READ FIRST.
- Section 2 NAMES OF PARTS
- Section 3 PREPARATIONS
- Section 4 BASIC OPERATION
- Section 5 COPY FUNCTIONS
- Making 2-Sided copies from various types of originals
- Copying two-page originals onto separate sheets: Page Separation/Split Copy Modes
- Making a margin space on the copies
- Making copies with clean edges
- Fitting the image of either two or four originals onto a single copy page
- Automatic Sorting of copy sets
- Saving on toner use
- Memorizing frequently used settings: Program Function
- Section 6 COPIER MANAGEMENT
- Copy Management Mode
- Department Management Modes
- Department Management Code Operations Procedures
- Department Code Registration
- Deleting Department Codes
- Clearing the Department Management Count
- Outputting the Department Management List
- How to set the Department Management Mode
- Making copies when the copier is in the Department Management Mode
- Default Setting Mode
- Checking the Total Counter and Printing Out the Counter Report
- Copy Management Mode
- Section 7 OPTIONAL EQUIPMENT
- Section 8 TROUBLESHOOTING
- Section 9 MAINTENANCE AND OPERATION INFORMATION
- Appendix: Functions and Settings Combination Chart
2-1
Section 2 NAMES OF PARTS
(1) Original Cover
Open/Close this to set the copy original on the glass platen.
(2) Copy Store Section
Finished copies will be accumulated here. Up to 250 (80 g/m
2
)
sheets of standard paper can be accumulated here.
(3) Operation Panel
Contains the keys and indicators for operating the copier.
(4) Drawer
Holds up to 300 sheets (80 g/m
2
) of standard copy paper.
(5) Paper Width Guides
Grasp the guides to adjust them to the width of the paper.
(6) Paper Stopper
Grasp the guides and adjust them to the length of the paper.
(7) Left Cover Handle
Lift up this handle to open the left cover.
(8) Multi-bypass tray
Load paper here when copying onto small-size or special
paper.
(9) Multi-bypass extension
Pull this out when setting paper sizes larger than 8
1/2" ×
11"/A4R on the multi-bypass tray.
(10) Insert Guides
Adjust this to the paper width for multi-bypass tray operation.
Main Body
(1)
(2)
(3)
(7)
(8)
(9)
(10)
(6) (5)
(4)