Operation Manual
Table Of Contents
- Energy Star Program
- Please read this Operation Guide before using the copier. Keep it close to the copier for easy re...
- Section 1 IMPORTANT! PLEASE READ FIRST.
- Section 2 NAMES OF PARTS
- Section 3 PREPARATIONS
- Section 4 BASIC OPERATION
- Section 5 COPY FUNCTIONS
- Making 2-Sided copies from various types of originals
- Copying two-page originals onto separate sheets: Page Separation/Split Copy Modes
- Making a margin space on the copies
- Making copies with clean edges
- Fitting the image of either two or four originals onto a single copy page
- Automatic Sorting of copy sets
- Saving on toner use
- Memorizing frequently used settings: Program Function
- Section 6 COPIER MANAGEMENT
- Copy Management Mode
- Department Management Modes
- Department Management Code Operations Procedures
- Department Code Registration
- Deleting Department Codes
- Clearing the Department Management Count
- Outputting the Department Management List
- How to set the Department Management Mode
- Making copies when the copier is in the Department Management Mode
- Default Setting Mode
- Checking the Total Counter and Printing Out the Counter Report
- Copy Management Mode
- Section 7 OPTIONAL EQUIPMENT
- Section 8 TROUBLESHOOTING
- Section 9 MAINTENANCE AND OPERATION INFORMATION
- Appendix: Functions and Settings Combination Chart
![](/manual/kyocera/km2020/operation-manual-english/images/img-35.png)
Section 4 BASIC OPERATION
4-7
Pressing the [Energy Saver] key will put the copier into a resting
state even when the Power Switch is ON. The No. of Copies display
on the Operation Panel will change to “- - -”, the Conserve Power
indicator will light up and all other indicators will be turned off.
Press any key on the Operation Panel or open and close the
Original Cover in order to resume copying operations. In the case
where the optional Document Processor is installed, placing an
original in the Document Processor will also revert the copier to the
state where copies can be made. The recovery time before copies
can be made is within 10 seconds.
Note
A function to automatically enter the Low Power Mode
after a set interval in which no copies have been
produced has passed is also included. (Refer to P.6-14
"Exposure Steps".)
Low Power Mode