Operation Manual
Table Of Contents
- Energy Star Program
- Please read this Operation Guide before using the copier. Keep it close to the copier for easy re...
- Section 1 IMPORTANT! PLEASE READ FIRST.
- Section 2 NAMES OF PARTS
- Section 3 PREPARATIONS
- Section 4 BASIC OPERATION
- Section 5 COPY FUNCTIONS
- Making 2-Sided copies from various types of originals
- Copying two-page originals onto separate sheets: Page Separation/Split Copy Modes
- Making a margin space on the copies
- Making copies with clean edges
- Fitting the image of either two or four originals onto a single copy page
- Automatic Sorting of copy sets
- Saving on toner use
- Memorizing frequently used settings: Program Function
- Section 6 COPIER MANAGEMENT
- Copy Management Mode
- Department Management Modes
- Department Management Code Operations Procedures
- Department Code Registration
- Deleting Department Codes
- Clearing the Department Management Count
- Outputting the Department Management List
- How to set the Department Management Mode
- Making copies when the copier is in the Department Management Mode
- Default Setting Mode
- Checking the Total Counter and Printing Out the Counter Report
- Copy Management Mode
- Section 7 OPTIONAL EQUIPMENT
- Section 8 TROUBLESHOOTING
- Section 9 MAINTENANCE AND OPERATION INFORMATION
- Appendix: Functions and Settings Combination Chart
Section 5 COPY FUNCTIONS
5-4
Page separation/Split copy from book
originals
Copy books, magazines, etc. with two facing pages of an open-faced
original onto separate sheets of paper.
Notes
[Inch specifications]
• The original sizes that can be used are 11" × 17" and
8
1/2" × 11". The paper sizes that can be used are 11" ×
8
1/2". A3, B4, A4R, B5R and A5R Original sizes and A4
and B5 paper sizes can also be used when Custom Size
is set.
• The paper size can be changed and the magnification
adjusted to fit the size of the paper.
[Metric specifications]
• The original sizes that can be used are A3, B4, A4R,
B5R and A5R. The paper sizes that can be used are A4
and B5. 11" × 17" and 8
1/2" × 11" Original sizes and
11" × 8
1/2" paper sizes can also be used when Custom
Size is set.
• The paper size can be changed and the magnification
adjusted to fit the size of the paper.
Page separation/Split copy from 2-sided
originals
The original is copied separately as simplex pages.
Note
The Document Processor (option) is necessary.
1 Set the original.
Note
Set the original in the optional Document Processor
when making copies from Front and Back originals.
2 Press the Split Copy key, select the type of original, and
select [2-Sided → 2-Sided] or [Book → 1-Sided] to light up
the corresponding display.
3 Press the [Start] key.
The copier will begin copying.
In the case where Sort Copies has been set, proceed to
Step 4.
Copying two-page originals onto separate sheets:
Page Separation/Split Copy Modes
2
1
21
1
2
12
Original Copy
2
1
1
2
Original Copy