Operation Manual
Table Of Contents
- Energy Star Program
- Please read this Operation Guide before using the copier. Keep it close to the copier for easy re...
- Section 1 IMPORTANT! PLEASE READ FIRST.
- Section 2 NAMES OF PARTS
- Section 3 PREPARATIONS
- Section 4 BASIC OPERATION
- Section 5 COPY FUNCTIONS
- Making 2-Sided copies from various types of originals
- Copying two-page originals onto separate sheets: Page Separation/Split Copy Modes
- Making a margin space on the copies
- Making copies with clean edges
- Fitting the image of either two or four originals onto a single copy page
- Automatic Sorting of copy sets
- Saving on toner use
- Memorizing frequently used settings: Program Function
- Section 6 COPIER MANAGEMENT
- Copy Management Mode
- Department Management Modes
- Department Management Code Operations Procedures
- Department Code Registration
- Deleting Department Codes
- Clearing the Department Management Count
- Outputting the Department Management List
- How to set the Department Management Mode
- Making copies when the copier is in the Department Management Mode
- Default Setting Mode
- Checking the Total Counter and Printing Out the Counter Report
- Copy Management Mode
- Section 7 OPTIONAL EQUIPMENT
- Section 8 TROUBLESHOOTING
- Section 9 MAINTENANCE AND OPERATION INFORMATION
- Appendix: Functions and Settings Combination Chart
Section 5 COPY FUNCTIONS
5-15
It is possible to Sort the number of copy sets needed from multiple
sheets of originals.
Note
Whether or not to sort while changing the direction for
each set at the time of sorting can be changed using the
Default Settings Mode. (Refer to P.6-28 "Rotate Sort
Setting".)
1 Set the original.
Note
When an original is set in the optional Document
Processor, the Sort indicator will light and Sort Copies
will be set. In this case, proceed to Step 3.
2 Press the [Sort] key.
3 Input the number. of sets of copies using the Keypad.
4 Press the [Start] key.
The copier will begin reading in the original.
When an original has been set in the optional Document
Processor copying will begin automatically.
When the original has been set on the platen and the
scanning of the original completed, “1-” (No. of Originals
Read In) is displayed and the Sort display blinks. When
this occurs, carry out the following procedure.
Inch specifications Metric specifications
Automatic Sorting of copy sets
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
Sort (no sorting)
Copy
Original
Original
Sort (sorting)
Copy