Operation Manual
Table Of Contents
- Energy Star Program
- Please read this Operation Guide before using the copier. Keep it close to the copier for easy re...
- Section 1 IMPORTANT! PLEASE READ FIRST.
- Section 2 NAMES OF PARTS
- Section 3 PREPARATIONS
- Section 4 BASIC OPERATION
- Section 5 COPY FUNCTIONS
- Making 2-Sided copies from various types of originals
- Copying two-page originals onto separate sheets: Page Separation/Split Copy Modes
- Making a margin space on the copies
- Making copies with clean edges
- Fitting the image of either two or four originals onto a single copy page
- Automatic Sorting of copy sets
- Saving on toner use
- Memorizing frequently used settings: Program Function
- Section 6 COPIER MANAGEMENT
- Copy Management Mode
- Department Management Modes
- Department Management Code Operations Procedures
- Department Code Registration
- Deleting Department Codes
- Clearing the Department Management Count
- Outputting the Department Management List
- How to set the Department Management Mode
- Making copies when the copier is in the Department Management Mode
- Default Setting Mode
- Checking the Total Counter and Printing Out the Counter Report
- Copy Management Mode
- Section 7 OPTIONAL EQUIPMENT
- Section 8 TROUBLESHOOTING
- Section 9 MAINTENANCE AND OPERATION INFORMATION
- Appendix: Functions and Settings Combination Chart
1-1
Section 1 IMPORTANT! PLEASE READ
FIRST.
Caution Labels
Labels related to safety have been attached to the product in the locations shown below. Please observe the
warnings to prevent accidents such as burns and electrical shock while clearing paper misfeeds and adding toner.
Note: Do not remove any of these labels.
Label1
High voltage generated in this
section. There is a risk of
getting shocked so do not touch
anything in this section.
Label3
High voltage generated in this section.
There is a risk of getting shocked so do
not touch anything in this section.
Label2
High temperature inside this section.
There is the risk of being burned so do
not touch anything within.
Label4
High temperature in the upper part of this
section. There is the risk of being burned
so do not touch anything within.
Label5
Sections identified by this label operate at
high temperatures. There is the risk of
being burned so do not touch anything
within.