Operation Manual
Table Of Contents
- Energy Star Program
- Please read this Operation Guide before using the copier. Keep it close to the copier for easy re...
- Section 1 IMPORTANT! PLEASE READ FIRST.
- Section 2 NAMES OF PARTS
- Section 3 PREPARATIONS
- Section 4 BASIC OPERATION
- Section 5 COPY FUNCTIONS
- Making 2-Sided copies from various types of originals
- Copying two-page originals onto separate sheets: Page Separation/Split Copy Modes
- Making a margin space on the copies
- Making copies with clean edges
- Fitting the image of either two or four originals onto a single copy page
- Automatic Sorting of copy sets
- Saving on toner use
- Memorizing frequently used settings: Program Function
- Section 6 COPIER MANAGEMENT
- Copy Management Mode
- Department Management Modes
- Department Management Code Operations Procedures
- Department Code Registration
- Deleting Department Codes
- Clearing the Department Management Count
- Outputting the Department Management List
- How to set the Department Management Mode
- Making copies when the copier is in the Department Management Mode
- Default Setting Mode
- Checking the Total Counter and Printing Out the Counter Report
- Copy Management Mode
- Section 7 OPTIONAL EQUIPMENT
- Section 8 TROUBLESHOOTING
- Section 9 MAINTENANCE AND OPERATION INFORMATION
- Appendix: Functions and Settings Combination Chart
![](/manual/kyocera/km2020/operation-manual-english/images/img-95.png)
Section 8 TROUBLESHOOTING
8-3
Stop copying operations when a paper misfeed occurs. When a
paper misfeed occurs, the indicator for the location of the paper
misfeed will light up on the Operation Panel and either “J” plus a
2-digit number or “PF” will be displayed as notification of the
location of the paper misfeed.
With the Power Switch in the ON (|) position, refer to P.8-3
"Removal Procedure" and clear the paper misfeed.
Inch specifications Metric specifications
Misfeed location indicators
(1) Paper misfeed in the paper supply section – Refer to
P.8-3.
(2) Paper misfeed in the left cover internal section – Refer
to P.8-4.
(3) Paper misfeed in the optional Document Processor –
Refer to P.8-5.
(4) Paper misfeed in the optional drawer – Refer to P.8-6.
Cautions
* Do not attempt to reuse paper that has jammed before.
* When a sheet gets torn during removal, make sure that the
remnants do not remain in the machine. Failure to completely
remove remnants of torn pages can lead to paper misfeeds.
* The copier will start warm up operations after the paper misfeed
processing has been completed. The paper misfeed indicator
lamp will go off and the copier will be restored to the state it was
in before the paper misfeed occurred.
Removal Procedure
Paper misfeed in the paper supply section
Paper misfeed in the drawer (J11, J21)
When the paper misfeed location is lit as shown in the illustration
below, the paper misfeed has occurred in the drawer. Use the
procedure below to clear it.
Inch specifications Metric specifications
1 Pull the drawer out.
If paper jams
WARNING
The electrically charged section inside the main
unit of the copier uses high voltage. Exercise
caution in handling it to prevent electric shock.
(3)
(2)
(1)
(4)
CAUTION
The fixation section inside the main unit of the
copier is extremely hot. Exercise caution in
handling it to prevent getting burned.