INSTRUCTION HANDBOOK * The above illustration includes the optional original cover. Please read the instruction handbook before using the copier. Keep it close to the copier for easy reference.
As an ENERGY STAR Partner, KYOCERA MITA CORPORATION has determined that this product meets the ENERGY STAR guidelines for energy efficiency. The ENERGY STAR program is an energy reduction plan introduced by the United States Environmental Protection Agency in response to environmental issues and for the purpose of advancing the development and utilization of more energy efficient office equipment. * ENERGY STAR is a U.S. registered mark.
Please read the instruction handbook before using the copier. Keep it close to the copier for easy reference. The sections of this handbook and parts of the copier marked with symbols are safety warnings meant to protect the user, other individuals and surrounding objects, and ensure correct and safe usage of the copier. The symbols and their meanings are indicated below.
CONTENTS CHAPTER 1 IMPORTANT! PLEASE READ FIRST ..... 1-1 CHAPTER 6 COPIER MANAGEMENT ........................ 6-1 CAUTION LABELS ............................................... 1-1 1. Copy management ................................................... 6-1 INSTALLATION PRECAUTIONS .......................... 1-2 PRECAUTIONS FOR USE ................................... 1-3 (1) Copy management mode ....................................
● MAKING FULL USE OF THE MACHINE’S ADVANCED FUNCTIONS the machine automatically select 1 Having paper of the same size as the original (page 4-1) ■ Specifying the magnification by selecting the paper size (page 4-5) a margin on copies 4 Making (page 5-5) functions for making enlarged 2 Various and reduced copies ■ Enlarging/reducing copies to fit the size of paper in a specified drawer (page 4-4) ■ Selecting t
● MAKING FULL USE OF THE MACHINE’S ADVANCED FUNCTIONS full range of optional equipment is 13 Aavailable ■ RADF (Reversing Auto Document Feeder) (page 7-3) ■ Drawer (page 7-3) ■ Finisher (page 7-3) ■ Duplex unit (page 7-3) ■ Job separator (page 7-3) ■ Key counter (page 7-3) ■ Printer board (page 7-4) ■ Printer network board (page 7-4) ■ Network scanner (page 7-4) ■ ADF (automatic document feeder) (page 7-1) iii
CHAPTER 1 IMPORTANT! PLEASE READ FIRST. CAUTION LABELS Caution labels have been attached to the copier at the following locations for safety purposes. BE SUFFICIENTLY CAREFUL to avoid fire or electric shock when removing a paper jam or when replacing toner. Label 2 High temperature inside. Do not touch parts in this area, because there is a danger of getting burned. ...................... Label 1 High voltage inside. NEVER touch parts in this area, because there is a danger of electric shock. ...........
INSTALLATION PRECAUTIONS ■ Environment ■ Power supply/Grounding the copier CAUTION • Avoid placing the copier on or in locations which are unstable or not level. Such locations may cause the copier to fall down or fall over. This type of situation presents a danger of personal injury or damage to the copier. ......................................................................... WARNING • DO NOT use a power supply with a voltage other than that specified. Avoid multiple connections in the same outlet.
PRECAUTIONS FOR USE ■ Cautions when using the copier WARNING • DO NOT place metallic objects or containers with water (flower vases, flower pots, cups, etc.) on or near the copier. This type of situation presents a danger of fire or electrical shock should they fall inside. ................... • DO NOT remove any of the covers from the copier as there is a danger of electrical shock from high voltage parts inside the copier. ................................................
CHAPTER 2 NAMES OF PARTS 1.
CHAPTER 2 NAMES OF PARTS 1 Original cover (Open/close to set the original on the platen.) 2 Operation panel (Contains the keys and indicators for operating the copier.) fi Handles for transport (The right two handles are indented handles. The left two become handles when pulled out.) 3 Left cover handle (Hold to open the left cover.) 4 Left cover (Open when a paper misfeed occurs.) 5 Multi-Bypass (Load paper here when copying onto small-size or special paper.
CHAPTER 2 NAMES OF PARTS 2. Operation panel 1 Start key (Indicator) (When the indicator is lit green, press to start copying.) 2 Clear All key (See the “● Initial mode” on page 2-4.) 3 Interrupt key (Indicator) (Press to interrupt copying. The Indicator will light when the key is pressed. See page 4-6.) 4 Energy Saver (preheat) key (Indicator) (Press to select the energy saver mode. The indicator is lit while the energy saver mode is ON. See page 4-7.
CHAPTER 2 NAMES OF PARTS ● Initial mode (at the end of warm-up or when the Clear All key is pressed) In the initial mode, paper of the same size as the original is selected automatically (“auto paper selection mode”), the number of copies is set to “1” and copy quality is set to “Text & Photo”. NOTE • It is also possible to change the default setting for copy exposure adjustment to “auto exposure mode” in the initial mode. (See “1 EXPOSURE MODE” on page 6-11.
CHAPTER 3 HOW TO LOAD PAPER 1. How to load paper Paper can be loaded into the two drawers and the multi-bypass. 2 Press the drawer bottom plate down and fix it there. 3 Hold the width adjustment lever and move it to align the width guide with the required paper width. Paper sizes are marked inside the drawer. 4 Hold both sides of the length adjustment plate and move it to align with the required paper length.
CHAPTER 3 HOW TO LOAD PAPER 5 Set the paper flush against the left-hand wall of the drawer. 7 Gently push the drawer back in. * Check that the paper is kept under the claws of the drawer. If not, reload the paper. NOTE • Before leaving the copier in disuse for a prolonged period of time, remove the paper from the drawer(s) and seal it in its original packaging to protect from moisture.
CHAPTER 3 HOW TO LOAD PAPER 2 Adjust the insert guides to the size of the paper to be loaded. ● Setting the paper size for the multi-bypass By setting either the transparency mode or thick paper mode and the paper size for the multi-bypass, the multi-bypass can be automatically selected according to the original size such as when the auto paper selection mode is selected. 1 Press and hold the Paper Select key for 3 seconds.
CHAPTER 3 HOW TO LOAD PAPER 4 Press the cursor down key. 5 Press the cursor right or cursor left key and select the paper width, which is shown highlighted. The paper width can be set to any value from 148 to 420 mm in 1 mm increments. 6 Press the enter key. 3 Open the envelope and set it with the print side face-down and its flap opposite to the insertion slot and then insert it along the insert guide as far as it will go.
CHAPTER 3 HOW TO LOAD PAPER 2. Replacing the toner cartridge and waste toner tank If "ADD TONER TO RESUME COPYING" appears on the message display, replenish the toner. Although several copies can be made after the message appears, it is recommended to replace the toner cartridge immediately. After replacing the toner cartridge, be sure to also replace the waste toner tank. * Replenish toner only when the message is displayed. CAUTION Do not incinerate toner and toner containers.
CHAPTER 3 HOW TO LOAD PAPER 6 Turn the toner cartridge release lever to the left as far as it will go. The new toner cartridge is now be locked. 7 While holding the waste toner tank release lever 1 up, remove the waste toner tank. 9 10 8 While holding the waste toner tank release lever up, fit the new waste toner tank into the copier. Gently pull the cleaning shaft as far as it will go and then push it back in. Close the opening of the waste toner tank with its seal.
CHAPTER 4 BASIC OPERATION 1. Basic copying procedure 3 1 1. Warm-up Turn the main switch ON ( l ). At the end of warm-up, “READY TO COPY.” will appear on the message display. NOTE • If originals are set and the Start key is pressed while the copier is still warming up, copying will begin as soon as warm-up ends. 2 2. Setting originals Set originals on the platen or in the DF (document feeder).
CHAPTER 4 4 4. Paper size selection When “APS” appears on the message display, paper of the same size as the original is automatically selected. To copy the original’s image onto a different size paper without changing the size of the image, press the Paper Select key for the desired size of paper, and press the Manual key. To make copies of the same size as the originals with images of the same size, no special settings are required.
CHAPTER 4 BASIC OPERATION 7 7. Setting the number of copies Use the numeric keys to enter the desired number of copies on the message display. Up to 250 copies can be set. NOTE • It is possible to lower the limit on the number of copies that can be set at a time. (See “9 COPY LIMIT” on page 6-13.) 8 8. Starting copying Press the Start key. If the Start indicator is lit green and “READY TO COPY.” is displayed on the message display, copying is possible. 9 9.
CHAPTER 4 BASIC OPERATION 2. Enlargement/reduction (1) Auto magnification selection mode 2 Press the Paper Select key to specify the paper size. The magnification ratio will be displayed. 3 Copying will start when the Start key is pressed. The original image is enlarged/reduced automatically according to the selected paper size. IMPORTANT • When using this mode regularly, make sure that “AMS” has been selected in “8 AMS MODE” on page 6-12.
CHAPTER 4 BASIC OPERATION (3) Standard zoom mode Enlargement/reduction copying is possible using the ratios preset in the copier. Available ratios Reduction 50% : A3 → A5 70% : A3 → A4, A4 → A5 75% : 11" × 15" → A4 90% : Folio → A4 Enlargement 106% : 11" × 15" → A3 127% : Folio → A3 141% : A4 → A3, A5 → A4 200% : A5 → A3 1 Set the original(s). 2 Press the Preset R/E key. The zoom mode setting screen will appear in the message display.
CHAPTER 4 BASIC OPERATION 3. Interrupt copying Interrupt copying is useful if, during one copy job, other originals need to be copied at different settings. The interrupted copy job can be resumed at the same settings as before after the rush job is finished. 1 Press the Interrupt key to light the indicator. The “INTERRUPT MODE.” screen will appear. 2 Remove the present original(s) and put it (them) aside. 3 Set the new original(s) and execute copying.
CHAPTER 4 BASIC OPERATION 4. Energy saver (preheat) function This function turns the machine off to save energy by pressing the Energy Saver (preheat) key, while leaving the main switch turned ON. When this function is activated, the Energy Saver (preheat) indicator is the only indicator lit on the operation panel. 5. Auto shut-off function This function automatically turns the main switch OFF (O) if no copying operation is performed for a certain period (15 to 240 minutes).
CHAPTER 5 FUNCTIONS 1. Duplex copying from various originals [Duplex copy] Duplex copies can be made from two-page originals or one-sided originals with the optional duplex unit. (2) Duplex copying from a book original Facing pages of a magazine or book are copied on both sides of the paper by a single press of the Start key. IMPORTANT • Duplex copies cannot be made with the multi-bypass.
CHAPTER 5 (3) Duplex copying from one-sided originals The one-sided original is copied on both sides (back and front) of the paper. When an odd number of originals are copied, the back side of the last page is blank. NOTE • The back side copy can also be rotated 180 degrees. 1 Normal: The back side comes out in the same direction as the original. 2 Rotate: The back side is rotated 180 degree with respect to the original. When bound at the top, the copies are oriented in the same direction.
CHAPTER 5 FUNCTIONS 6 Select whether to rotate the back side of the copy 180 degree or not. 7 Press the enter key. The message display will be changed to the “DUPLEX MODE.” screen. 8 Press the Start key. Scanning of the originals will start. When setting the original in the DF, copying will be performed. When setting the original on the platen, go to the next step. 9 Replace the original and press the Start key. Scanning of the originals will start.
CHAPTER 5 FUNCTIONS 2. Copying two-page originals as separate pages [Page separation copy mode] (1) Page separation copies from book originals 1 Set the original(s). Facing two-page of a magazine, book or the like is divided down the middle and copied onto two separate sheets of paper. NOTE • When copying from a book, set the book as illustrated. IMPORTANT 2 Press the Duplex/Split Page key to light the indicator. The function selection screen will appear.
CHAPTER 5 FUNCTIONS 3. Making a margin space for binding [Margin mode] The image of the original is shifted rightward to make a margin for binding on the left side of the paper between 6 mm and 18 mm in 1 mm increments. 3 Make sure that “MARGIN” has been selected, and press the enter key. The margin copy setting screen will appear. 4 Press the cursor right or left key to select the margin width if the margin width setting is changed from the default value.
CHAPTER 5 FUNCTIONS 4. Making copies with clean edges [Border erase mode] (1) Erasing blemishes from edges of copies (Sheet Erase) Use for erasing shadows, lines, etc., that occur around the edges of copies made from sheet originals. The border width can be selected from 6, 12 and 18 mm. (a is the width of erasing border.) 1 Set the original(s). NOTE • See step 1 on page 5-4 to set the book original. 2 Press the Margin/Border Erase/Book Erase key to light the indicator.
CHAPTER 5 FUNCTIONS 5. One copy from two or four originals [Layout copy] 2 or 4 originals can be combined into a single copy. The borderline of each original can also be marked with a solid line or dotted line. (2) 4-UP Use this mode to copy four originals onto one sheet. It can be used in conjunction with the duplex copy mode to copy eight originals onto one sheet, though this will require the optional duplex unit.
CHAPTER 5 FUNCTIONS 1 Press the Layout key to light the indicator. The layout copy setting screen will appear. 7 Press the Start key. If originals are set in the DF, all originals are scanned one by one and copying performed accordingly. If setting originals on the platen, go to the next step. 2 Press the cursor down or up key to select the layout copy mode. In the “4-UP” mode, when setting originals horizontally, select “4-UP (Z)”; when setting originals vertically, select “4-UP (N)”.
CHAPTER 5 FUNCTIONS 6. Sorting automatically [Sort copy] Since copying is performed after memorizing multiple originals, copies can be sorted into the required number of sets even without an optional finisher. 3 Enter the number of copies and press the Start key. When using the DF, scans and copies originals one at a time. When setting the originals on the platen, go to the next step. 4 Set the next original and press the Start key.
CHAPTER 5 7. Rotate copy Even when the orientation of original is different from that of paper in the drawer, the image will be turned 90 degrees counter-clockwise for copying. For this function, no setting is required. FUNCTIONS 8. Auto selection mode When the optional DF is used, if the paper size is not selected with the Paper Select key the DF automatically detects the size of every original. Copies are then made onto paper of the same size as the originals.
CHAPTER 6 COPIER MANAGEMENT 1. Copy management The total number of copies made by each department can be managed using 4-digit codes for up to 100 departments. Limits for the number of copies can be set on a department-bydepartment basis. (1) Copy management mode Copy management mode Copy management mode content Page ● Registering new ID-codes Assigns a 4-digit ID-code and a maximum number of copies to the departments in your organization. Up to 100 departments can be assigned.
CHAPTER 6 Copy management mode COPIER MANAGEMENT Copy management mode content Page ● Turning copy management ON/OFF Turn copy management ON when required (to apply the settings made). Turn it OFF when not required. ● Turning printer management ON/OFF Turn ON to use the printer management for printing when using the printer function of this copier. Turn OFF when not using printer management. • This mode is not displayed when the copier is not equipped with the optional printer board.
CHAPTER 6 COPIER MANAGEMENT (2) How to display the selection screen of the copy management mode 1 Press the */Language key to light the indicator. The management mode selection screen will appear. 2 Press the cursor down key to select “MANAGEMENT”. 3 Press the enter key. 4 Enter the 4-digit management code “2000” with the numeric keys. (3) How to make various settings ● Registering new ID-codes Display the copy management selection screen.
CHAPTER 6 8 Enter the maximum number of copies with the numeric keys. Limits are set in units of 1000’s, up to a maximum of 999,000. COPIER MANAGEMENT ● Deleting ID-codes Display the copy management selection screen. (See page 6-3.) 1 2 Press the cursor down key to select “COPY MGMT SETTING”. 3 Press the enter key. 4 Press the cursor down key to select “CODE DELETE”. 5 Press the enter key. 6 Press the cursor down or up key to select the ID-code to be deleted.
CHAPTER 6 COPIER MANAGEMENT 8 A message asking you to confirm the deletion will appear. To delete the code, press the cursor up key to select “YES” and press the enter key. To cancel the command, make sure that “NO” has been selected and press the enter key. The message display will return to the screen in step 6. 4 Press the cursor down key to select “COPY LIMIT CORRECTION”. 5 Press the enter key. 6 Press the cursor down or up key to select the ID-code whose limit is to be altered.
CHAPTER 6 10 Make sure that “END” has been selected and press the enter key. The message display will return to the screen in step 4. 11 Press the cursor up key to select “END”, and press the enter key. The message display will return to the screen in step 2. 12 Press the cursor up key to select “END”, and press the enter key. The message display will return to the “READY TO COPY.” screen. COPIER MANAGEMENT 6 A message will appear asking you to confirm whether to clear all copy counts or not.
CHAPTER 6 COPIER MANAGEMENT 5 Press the enter key. If having selected “TOTAL: ALL ID-CODES”, go to the next step. If having selected “ID-CODE LIST”, go to step 9. 6 The total number of copies will appear on the message display. The number of copies by size will appear at the bottom. Press the cursor down key to view the number of copies of the size other than those appearing on the message display. 7 When finished viewing, press the cursor up key to select “END”.
CHAPTER 6 ● Turning copy management ON/OFF Display the copy management selection screen. (See page 6-3.) 1 COPIER MANAGEMENT (4) Making copies when the copier is in the copy management mode When the copier is in the copy management mode, “ENTER 4-DIGIT CODE WITH #-KEYS” will appear on the message display. NOTE • Copy management ON or OFF appears in the upper right-hand of the screen. See the following procedures to turn copy management ON/OFF.
CHAPTER 6 COPIER MANAGEMENT 2. Default settings The state the copier is in at the end of warm-up or after the Clear All key has been pressed is called “initial mode”. The functions and values that are automatically preset for the initial mode are called “default settings”. “COPY DEFAULT” and “MACHINE DEFAULT” are set in the default settings. They can be changed as desired to suit the copying needs.
CHAPTER 6 Copy default setting Content of copy default setting COPIER MANAGEMENT Setting range Default setting Page ! BORDER WIDTH Sets the initial value of the border erase width for the sheet erase or book erase in the border erase mode (page 5-6). 6, 12, 18 mm 6 mm 6-13 @ DEFAULT DRAWER Specifies the paper feed drawer to be selected automatically when warm-up ends or when the Clear All key is pressed. Paper feed drawer 3 and 4 can be selected only when the optional drawer is installed.
CHAPTER 6 COPIER MANAGEMENT (2) How to set the copy default setting mode 1 Press the */Language key to light the indicator. The management mode selection screen will appear. 6 Press the enter key. 7 Make settings as explained below. NOTE • (>) displayed in each setting screen indicates the present setting value. • After finishing each setting, the display will return to the screen in step 5. If changing other settings, repeat step 5 to 7. 8 2 Press the cursor down key to select “COPY DEFAULT”.
CHAPTER 6 3 A.E. 1 Press the cursor right or left key to move the cursor on the exposure scale. Move the cursor to the right to make copies darker, and to the left to make copies lighter. 2 Press the enter key. 4 MIX ORI.DENSITY Press the cursor right or left key to move the cursor on the exposure scale. Move the cursor to the right to make copies darker, and to the left to make copies lighter. 1 6 TXT ORI.DENSITY Press the cursor right or left key to move the cursor on the exposure scale.
CHAPTER 6 COPIER MANAGEMENT 9 COPY LIMIT Enter the maximum number of copies that can be made with the numeric keys. 1 2 Press the enter key. 0 MARGIN WIDTH Press the cursor right or left key to select the margin width. The width can be set between 6 mm and 18 mm in 1 mm increments. 1 2 Press the enter key. ! BORDER WIDTH Press the cursor down or up key to select the border erase width. The width can be selected from 6, 12 and 18 mm.
CHAPTER 6 COPIER MANAGEMENT (3) Machine default settings The following 15 types of settings can be changed in the machine default setting mode. Set them as desired, in order to gain full use of your copier. Machine default setting Content of machine default setting Setting range Default setting Page 1 STATUS REPORT Prints contents of machine default settings as a status report. 2 AUTO SHUT-OFF Turns the auto shut-off function (page 4-7) On or Off.
CHAPTER 6 COPIER MANAGEMENT Machine default setting Content of machine default setting Setting range Default setting Page 0 SHUT-OFF TIME Selects a certain length of time from when the copier is not used to when the auto shut-off function (page 4-7) switches off the power automatically. The auto shut off function can be turned off as well. This setting cannot be used in that case (“2 AUTO SHUT-OFF”). The initial setting is 30 minutes.
CHAPTER 6 (4) How to set the machine default setting mode 1 Press the */Language key to light the indicator. The management mode selection screen will appear. COPIER MANAGEMENT 6 Press the enter key. 7 Make settings as explained below. NOTE • (>) displayed in each setting screen indicates the present setting value. • After finishing each setting, the display will return to the screen in step 5. If changing other settings, repeat step 5 to 7.
CHAPTER 6 COPIER MANAGEMENT 3 SPECIAL PAPER Press the cursor down or up key to select the paper feed drawer to be marked with (*). 1 2 Press the cursor right or left key. The mark (*) will appear aside the paper feed drawer. Press the cursor right or left key again to cancel it. 5 PAPER TYPE (1ST to 4TH) Press the cursor down or up key to select the paper type. 1 2 Press the enter key. NOTE • The setting procedure for the paper type is the same for Drawers 1, 2, 3 and 4.
CHAPTER 6 8 SELECT EJECTOR OF COPY Press the cursor down or up key to select the eject point. 1 2 COPIER MANAGEMENT ! DISPLAY CONTRAST ADJUST. Press the cursor right or left key to move the cursor on the exposure scale. Move the cursor to the right to make display darker, and to the left to make display lighter. 1 Press the enter key. 2 NOTE Press the enter key. • The display shown in step 1 appears when the finisher is installed.
CHAPTER 6 COPIER MANAGEMENT $ AUTO DRAWER SWITCH Press the cursor down or up key to select “ON” or “OFF”. 1 3. Selection of language Selects the language to be used in the message display, from English, German, French, Italian and Spanish. 2 1 Press the */Language key to light the indicator. The management mode selection screen will appear. 2 Press the cursor down key to select “LANGUAGE”. 3 Press the enter key. Selectable languages will be displayed.
CHAPTER 7 OPTIONAL EQUIPMENT (1) ADF (Automatic document feeder) 3 DF part names Automatically feeds multiple sheet originals one by one for scanning.
CHAPTER 7 OPTIONAL EQUIPMENT 2 Set the originals on the original table in correct sequence with the side to be copied facing upward. Securely insert the leading edge of the originals into the DF as far as they will go. IMPORTANT • Do not set originals exceeding the limit indicated on the sticker attached on the rear original insertion guide. Setting more originals than specified may cause original misfeed. 2 Set the original with the side to be copied facing downward.
CHAPTER 7 OPTIONAL EQUIPMENT (2) RADF (Reversing Auto Document Feeder) The RADF automatically feeds one-sided originals one by one for scanning. It also reverses two-sided originals automatically for duplex copying and page separation copying. For details, see the RADF's instruction handbook. (3) Drawer Up to two drawers of the same type as that in the main body can be added. Capacity and the paper loading method is the same as those for the standard drawer in the main unit.
CHAPTER 7 OPTIONAL EQUIPMENT ● Setting the key counter Insert the key counter securely into the key counter opening. (10) Network scanner This copier can be used as a network scanner that allows access from multiple computers. NOTE • When the key counter function is used, copies cannot be made unless the key counter is inserted into the copier. If the key counter is not inserted securely, "INSERT KEY COUNTER." appears on the message display.
CHAPTER 8 WHEN A PROBLEM OCCURS 1. Error messages When any of the messages listed in the table below appear on the message display, take the corrective action as instructed. Message Action "CLOSE xxx COVER." The cover indicated is open. Close the cover securely. "ADD PAPER IN DRAWER." There is no paper in the drawer indicated. Load paper. Page 3-1 "CLOSE PAPER DRAWER." One of the drawers is not closed properly. Pull it out and push it back in all the way. "PAPER DRAWER IS OUT OF ORDER.
CHAPTER 8 WHEN A PROBLEM OCCURS Message Action Page "TIME FOR MAINTENANCE" Periodic maintenance is necessary to keep your copier in good condition. Contact your service representative as soon as possible. "MEMORY IS FULL." The copier memory if full. Either print out or clear all scanned data. It is not possible to copy or scan another original until one of these two operations is performed. "PAPER MISFEED.
CHAPTER 8 WHEN A PROBLEM OCCURS 2. When paper misfeeds If a paper misfeed occurs, copying will stop. A misfeed message will appear and the misfeed location will be indicated on the message display. Remove the misfed paper by referring to "(3) Removal procedures" with the main switch turned ON (|).
CHAPTER 8 WHEN A PROBLEM OCCURS 2 Remove the misfed paper while taking care not to tear it. * If the paper should be torn, remove all the scraps from the inside the copier. 3 Close the drawer slowly. * Check that the paper is kept under the claws of the drawer. If not, reload the paper. ● Misfeed in drawer left cover If the message "PAPER MISFEED. OPEN LEFT 2 (3) COVER." appears with the misfeed location indicator shown in the illustration, a misfeed has occurred in the drawer left cover.
CHAPTER 8 WHEN A PROBLEM OCCURS 2 Misfeed in the left cover If the message "PAPER MISFEED. OPEN LEFT 1 COVER." appears with the misfeed location indicator shown in the illustration, a misfeed has occurred in the left cover. Remove the misfed paper using procedure given below. 3 Remove the misfed paper while taking care not to tear it. If the paper is not easy to remove, proceed to the next step. If the paper is removed successfully, proceed to step 5.
CHAPTER 8 WHEN A PROBLEM OCCURS 5 Close the left cover and multi-bypass. IMPORTANT 4 Misfeed in duplex unit If the message "PAPER MISFEED. OPEN DRAWER OF DUPLEX UNIT." appears with the misfeed location indicator shown in the illustration, a misfeed has occurred in the duplex unit. Remove the misfed paper using the procedure given below. • If the optional duplex unit is installed, be sure to close the multibypass closing the duplex unit.
CHAPTER 8 WHEN A PROBLEM OCCURS 3. Troubleshooting If trouble occurs, carry out the applicable checks and actions given below. If the trouble persists, contact your service representative. Trouble Checks Action Nothing lights on the operation panel when the main switch is turned ON. Is the power plug connected to an AC outlet? Connect the plug to an AC outlet. No copies come out when the Start key is pressed.
CHAPTER 8 WHEN A PROBLEM OCCURS Trouble Copies come out too dark. Checks Is the copier in the auto exposure mode? Action Page To change the overall exposure, perform the auto exposure adjustment. 6-9 Is the copier in the manual exposure mode? Adjust the exposure to the correct degree using the copy exposure adjustment keys. 4-2 To change the overall exposure, perform the exposure adjustment for the each copy quality mode. Copies are dirty.
CHAPTER 9 CLEANING AND SPECIFICATIONS 1. Cleaning the copier CAUTION For safety purposes, ALWAYS remove the power plug from the outlet when performing cleaning operations. ● Cleaning the original cover Lift open the original cover. Wipe the back side of the original cover with a soft cloth dampened with alcohol or a mild detergent. * Never use thinner or other organic solvents for this purpose. ● Cleaning the platen Lift open the original cover.
CHAPTER 9 CLEANING AND SPECIFICATIONS 2. Specifications Type ............................................................................... Original table .................................................................. Copying system ............................................................. Originals ......................................................................... Copy sizes ..................................................................... Copying speed ...............................
Laser Safety Laser radiation could be hazardous to the human body. For this reason, laser radiation emitted inside this machine is hermetically sealed within the protective housing and external cover. In the normal operation of the product by user, no radiation can leak from the machine. This machine is classified as Class 1 laser product under IEC 825. CAUTION Performance of procedures other than those specified in this manual may result in hazardous radiation exposure.
CAUTION! The power plug is the main isolation device! Other switches on the equipment are only functional switches and are not suitable for isolating the equipment from the power source. VORSICHT! Der Netzstecker ist die Hauptisoliervorrichtung! Die anderen Schalter auf dem Gerät sind nur Funktionsschalter und können nicht verwendet werden, um den Stromfluß im Gerät zu unterbrechen.
* For best copy results and machine performance, we recommend that you use only KYOCERA MITA original supplies for your KYOCERA MITA copier.
KYOCERA MITA EUROPE B.V. Hoeksteen 40, 2132 MS Hoofddorp, The Netherlands Phone: (020) 6540000 Home page: http://www.mita.nl, Email: info@mita.nl KYOCERA MITA NEDERLAND B.V. Gyroscoopweg 122, 1042 AZ Amsterdam, The Netherlands Phone: (020) 5877200 KYOCERA MITA (U.K.) LTD. Mita House, Hamm Moor Lane, Addlestone, Weybridge, Surrey KT15 2SB, U.K. Phone: (01932) 858266 KYOCERA MITA ITALIA S.P.A. Via Marconi 8, 20041 Agrate Brianza, Milano, Italy Phone: (039) 65641 S.A. KYOCERA MITA BELGIUM N.V.
