Operation Manual
Table Of Contents
- CHAPTER 1 IMPORTANT! PLEASE READ FIRST.
- CHAPTER 2 NAMES OF PARTS
- CHAPTER 3 HOW TO LOAD PAPER
- CHAPTER 4 BASIC OPERATION
- CHAPTER 5 FUNCTIONS
- 1. Duplex copying from various originals [Duplex copy]
- 2. Copying two-page originals as separate pages [Page separation copy mode]
- 3. Making a margin space for binding [Margin mode]
- 4. Making copies with clean edges [Border erase mode]
- 5. One copy from two or four originals [Layout copy]
- 6. Sorting automatically [Sort copy]
- 7. Rotate copy
- 8. Auto selection mode
- CHAPTER 6 COPIER MANAGEMENT
- CHAPTER 7 OPTIONAL EQUIPMENT
- CHAPTER 8 WHEN A PROBLEM OCCURS
- CHAPTER 9 CLEANING AND SPECIFICATIONS
CHAPTER 5 FUNCTIONS
Set the original(s).
Press the Duplex/Split Page key to light the indicator.
The function selection screen will appear.
Make sure that “2-SIDED COPY” is selected and press the
enter key.
The duplex copy setting screen will appear.
Press the cursor down key to select the duplex copy mode.
Press the enter key.
If “1-SIDED ORIG.> DUPLEX” was selected, go to the next
step.
If “DUPLEX ORIG.> DUPLEX” or “BOOK ORIGINAL” was
selected, the message display will be changed to the
“DUPLEX MODE.” screen.
(3) Duplex copying from one-sided originals
The one-sided original is copied on both sides (back and front) of the
paper.
When an odd number of originals are copied, the back side of the last
page is blank.
NOTE
• The back side copy can also be rotated 180 degrees.
1Normal: The back side comes out in the same direction as the
original.
2Rotate: The back side is rotated 180 degree with respect to the
original.
When bound at the top, the copies are oriented in the same
direction.
5-2
3
4
5
1
2