Operation Manual
Table Of Contents
- CHAPTER 1 IMPORTANT! PLEASE READ FIRST.
- CHAPTER 2 NAMES OF PARTS
- CHAPTER 3 HOW TO LOAD PAPER
- CHAPTER 4 BASIC OPERATION
- CHAPTER 5 FUNCTIONS
- 1. Duplex copying from various originals [Duplex copy]
- 2. Copying two-page originals as separate pages [Page separation copy mode]
- 3. Making a margin space for binding [Margin mode]
- 4. Making copies with clean edges [Border erase mode]
- 5. One copy from two or four originals [Layout copy]
- 6. Sorting automatically [Sort copy]
- 7. Rotate copy
- 8. Auto selection mode
- CHAPTER 6 COPIER MANAGEMENT
- CHAPTER 7 OPTIONAL EQUIPMENT
- CHAPTER 8 WHEN A PROBLEM OCCURS
- CHAPTER 9 CLEANING AND SPECIFICATIONS
CHAPTER 5 FUNCTIONS
(2) 4-UP
Use this mode to copy four originals onto one sheet. It can be used in
conjunction with the duplex copy mode to copy eight originals onto
one sheet, though this will require the optional duplex unit.
(When setting originals on the platen, originals are arranged in the
order from 1, 2, 3 and 4.)
NOTE
• In the “4-UP” mode, the available modes differ depending on the
orientation of the originals.
• When performing duplex copy, the images on the back side can be
rotated.
5. One copy from two or four originals [Layout copy]
2 or 4 originals can be combined into a single copy.
The borderline of each original can also be marked with a solid line or
dotted line.
NOTE
• The original and copy paper must be the standard size.
(1) 2-UP
Use this mode to copy two originals onto one sheet. It can be used in
conjunction with the duplex copy mode to copy four originals onto one
sheet, though this will require the optional duplex unit.
(When setting the originals on the platen, originals are arranged in the
order from 1 to 2.)
NOTE
• When performing duplex copy, the images on the back side can be
rotated.
5-7