Operation Manual
Table Of Contents
- CHAPTER 1 IMPORTANT! PLEASE READ FIRST.
- CHAPTER 2 NAMES OF PARTS
- CHAPTER 3 HOW TO LOAD PAPER
- CHAPTER 4 BASIC OPERATION
- CHAPTER 5 FUNCTIONS
- 1. Duplex copying from various originals [Duplex copy]
- 2. Copying two-page originals as separate pages [Page separation copy mode]
- 3. Making a margin space for binding [Margin mode]
- 4. Making copies with clean edges [Border erase mode]
- 5. One copy from two or four originals [Layout copy]
- 6. Sorting automatically [Sort copy]
- 7. Rotate copy
- 8. Auto selection mode
- CHAPTER 6 COPIER MANAGEMENT
- CHAPTER 7 OPTIONAL EQUIPMENT
- CHAPTER 8 WHEN A PROBLEM OCCURS
- CHAPTER 9 CLEANING AND SPECIFICATIONS
CHAPTER 5 FUNCTIONS
Enter the number of copies and press the Start key.
When using the DF, scans and copies originals one at a time.
When setting the originals on the platen, go to the next step.
Set the next original and press the Start key.
NOTE
• Repeat this operation for all originals.
After all the originals have been scanned, press the enter
key.
Copying will start.
Since copying is performed after memorizing multiple originals, copies
can be sorted into the required number of sets even without an
optional finisher.
NOTE
• If “ON” is set in “$ ROTATE SORT” on page 6-13, and the paper
size is A4, the orientation of each set of copies is changed, thus
making copies easy to handle. To use this setting, A4 paper must be
set lengthwise in one drawer and widthwise in the other.
Set the original(s).
Press the sort mode key to light the indicator.
4
5
3
6. Sorting automatically [Sort copy]
1
2
5-9