Operation Manual
Table Of Contents
- CHAPTER 1 IMPORTANT! PLEASE READ FIRST.
- CHAPTER 2 NAMES OF PARTS
- CHAPTER 3 HOW TO LOAD PAPER
- CHAPTER 4 BASIC OPERATION
- CHAPTER 5 FUNCTIONS
- 1. Duplex copying from various originals [Duplex copy]
- 2. Copying two-page originals as separate pages [Page separation copy mode]
- 3. Making a margin space for binding [Margin mode]
- 4. Making copies with clean edges [Border erase mode]
- 5. One copy from two or four originals [Layout copy]
- 6. Sorting automatically [Sort copy]
- 7. Rotate copy
- 8. Auto selection mode
- CHAPTER 6 COPIER MANAGEMENT
- CHAPTER 7 OPTIONAL EQUIPMENT
- CHAPTER 8 WHEN A PROBLEM OCCURS
- CHAPTER 9 CLEANING AND SPECIFICATIONS
CHAPTER 6 COPIER MANAGEMENT
Press the enter key.
Make settings as explained below.
NOTE
• (>) displayed in each setting screen indicates the present setting
value.
• After finishing each setting, the display will return to the screen in
step 5. If changing other settings, repeat step 5 to 7.
Press the cursor up key to select “END” and press the enter
key to finish settings. The message display will return to the
“READY TO COPY.” screen.
1EXPOSURE MODE
Press the cursor down or up key to select “AUTO”, “MIXED”,
“PHOTO” or “TEXT”.
Press the enter key.
2EXPOSURE STEPS
Press the cursor down or up key to select “5 STEPS” or
“9 STEPS”.
Press the enter key.
(2) How to set the copy default setting mode
Press the
*
/Language key to light the indicator.
The management mode selection screen will appear.
Press the cursor down key to select “COPY DEFAULT”.
Press the enter key.
Enter the management code “2000” with the numeric keys.
NOTE
• The 4-digit management code can be changed. (See “@ MANAGE-
MENT CODE CHANGE” on page 6-18.)
Press the cursor down or up key to select the copy default
setting to be changed. See “(1) Copy default settings” on
page 6-9 for settings that can be changed.
1
2
3
4
5
6
8
1
2
1
2
7
6-11