Operation Manual
Table Of Contents
- CHAPTER 1 IMPORTANT! PLEASE READ FIRST.
- CHAPTER 2 NAMES OF PARTS
- CHAPTER 3 HOW TO LOAD PAPER
- CHAPTER 4 BASIC OPERATION
- CHAPTER 5 FUNCTIONS
- 1. Duplex copying from various originals [Duplex copy]
- 2. Copying two-page originals as separate pages [Page separation copy mode]
- 3. Making a margin space for binding [Margin mode]
- 4. Making copies with clean edges [Border erase mode]
- 5. One copy from two or four originals [Layout copy]
- 6. Sorting automatically [Sort copy]
- 7. Rotate copy
- 8. Auto selection mode
- CHAPTER 6 COPIER MANAGEMENT
- CHAPTER 7 OPTIONAL EQUIPMENT
- CHAPTER 8 WHEN A PROBLEM OCCURS
- CHAPTER 9 CLEANING AND SPECIFICATIONS
CHAPTER 8 WHEN A PROBLEM OCCURS
8-8
6-9
9-1
3-6
4-1
7-1
3-1
3-1
8-3
6-9
4-2
Copies come out too dark. Is the copier in the auto exposure mode? To change the overall exposure, perform the
auto exposure adjustment.
Is the copier in the manual exposure mode? Adjust the exposure to the correct degree
using the copy exposure adjustment keys.
To change the overall exposure, perform the
exposure adjustment for the each copy
quality mode.
Copies are dirty. Is the platen or the original cover dirty? Clean the platen and/or the original cover.
Open the front cover and pull and push back
in the cleaning shaft.
Copy image is askew.
Are the originals set correctly?
When setting originals on the platen, align
their edges with the correct original size
scale for their size.
When setting originals in the optional DF,
adjust the original insertion guides to the
size of the originals correctly.
Misfeed occurs frequently. Is the paper set correctly in the drawer? Set paper properly.
Is paper curled, folded or wrinkled? Replace the paper with new paper.
Is there any misfed paper or loose scraps of
paper remaining inside the copier?
Carry out the appropriate procedure to
remove the paper.
Trouble Checks Action Page