Operation Manual

Maintenance
5-7
6
Place the old toner container in the plastic bag provided
for disposal.
7
While holding the charger cleaner rod, gently pull it out
as far as it will go and push it in again.
Repeat this operation two or three times.
Note Do not use excessive force to pull the rod or attempt to pull it out completely.
8
Remove the accompanying grid cleaner from its
package and remove its cap.
9
Fit the grid cleaner to the notch and install it into the
main body.
10
Pull the electrical charge section out as far as it will go
and push it in after moving it back and forth several
times.