Operation Manual

CHAPTER 2 NAMES OF PARTS
2-2
0 Multi-Bypass
(Load paper here when copying onto small-size or special paper.)
A Insert guides
(Be sure to set the paper width when loading paper on the multi-bypass.)
B Toner container
C Toner container release lever
(Operate to replace the toner container.)
D Waste toner box
E Cleaning shaft
(Pull and push back in after toner container replacement or when copy images become soiled with toner.)
F Front cover
(Open to replace the toner container or waste toner box.)
G Main switch
(Turn ON
(
I
)
before starting to make copies.)
H Copy store section
(Copied paper is stored here.)
I Length adjustment plate
(Adjust to the length of the paper to be set in the drawer.)
J Width adjustment lever
(Hold the lever and adjust the width guide to the width of the paper to be set in the drawer.)
K Handles for transport
(Become handles when pulled out.)
8
7
C
B
A
0
H
GKIJ
F
09 ED