Operation Manual

CHAPTER 8 WHEN A PROBLEM OCCURS
8-12
Copies come out too dark.
Copies are dirty.
Copy image is askew.
Misfeed occurs frequently.
Copies are wrinkled.
Black or white lines appear
on the copy.
Is the copier in the auto exposure mode?
Is the copier in the manual exposure
mode?
Is the platen or the original cover dirty?
Is the transfer roller contaminated?
Are the originals set correctly?
Is the paper set correctly in the drawer?
Is paper curled, folded or wrinkled?
Is there any misfed paper or loose scraps
of paper remaining inside the copier?
Is the separation in the paper feed sec-
tion dirty?
Is the electrostatic section dirty?
Page
Trouble
Checks
6-28
4-2
6-30
6-31
9-1
3-5
9-2
4-1
7-1
3-1
3-1
8-3
9-1
3-5
3-6
To change the overall exposure, perform the
auto exposure adjustment.
Adjust the exposure to the correct degree
using the copy exposure adjustment keys.
To change the overall exposure, perform the
exposure adjustment for the each copy qual-
ity mode.
Clean the platen and/or the original cover.
Open the front cover and pull and push back
in the cleaning shaft.
Clean the transfer roller with the cleaning
brush.
When setting originals on the platen, align
their edges with the correct original size
scale for their size.
When setting originals in the optional Docu-
ment Processor, adjust the original insertion
guides to the size of the originals correctly.
Set paper properly.
Replace the paper with new paper.
Carry out the appropriate procedure to re-
move the paper.
Clean the separator.
Open the front cover and pull and push back
in the cleaning shaft.
Action